Technical specifications for IC660BBS100
Brand GE Fanuc
Series Genius I-O
Part number IC660BBS100
Product Type I/O block
Circuit 8
Switch diagnosis failure Yes
Rated voltage 125 V DC / 115 V DC
Ac voltage range 93 to 132 volts AC
Dc voltage range 105 to 132 volts DC
Peak output current 15 amps
Heat dissipation 16.8 watts
The GE Fanuc IC660BBS100 I/O block is an isolated I/O block rated at 115 volts AC and 125 volts DC in the GE Genius I/O series. The IC660BBS100 I/O block has four isolation groups of two I/O circuits each rated to operate at 125 volts DC or 115 volts AC. If the output command status is different from the status of the switch inside the module itself, the IC660BBS100 I/O block reports the failed switch diagnostics message. The isolation rating between the group and the ground on the IC660BBS100 I/O block is 250 volts AC continuous. The transient rating has a peak of 2000 volts and a duration of 10 seconds. The IC660BBS100 I/O block measures 8.83 x 3.5 x 3.94 inches. The block weighs about 4 pounds. The heat dissipated by the module during operation is 16.8 watts.
The IC660BBS100 I/O block operates from 0 to 60 degrees Celsius. The maximum power required for the control block is 8 watts. The AC operating voltage range is 93 to 132 volts AC and the DC operating voltage range is 105 to 132 volts DC. The frequency range for AC operation is 47 to 63 Hz. The power supply voltage drop time is 10 milliseconds per cycle. The peak output current of each module is 15 amps at 35 degrees Celsius and 7.5 amps at 60 degrees Celsius. The IC660BBS100 I/O block has a 100 millisecond internal electronic short circuit trip (AC) and a 10 millisecond long delay trip (DC). The IC660BBS100 I/O block is compatible with GE Fanuc IC660HHM501 handheld display. The IC660BBS100 I/O block can be used with any GE Fanuc bus controller.
