Technical specifications for IC660BPM100
Brand GE Fanuc
Series Genius I-O
Manufacturer GE Fanuc (ex); Emerson Automation (Current) Emerson Automation (current)
Part number IC660BPM100
Series Genius I/O modules
Product Type Power monitoring block
Part number IC660BPM100
Input voltage 125 V DC, 115/230 V AC input
Product Description Genius PowerTrac
Maximum distance to main engine 7500 feet
Measurement parameters RMS voltage, current, active power, reactive power, KWH and power factor
Independent mode Yes
Communication Genius I/O
Load per voltage input < 0.1VA
IC660BPM100 is a PowerTrac Block Module. The module is essentially a power monitoring device with Genius I/O capabilities that can be integrated directly into the 90-3 Series, 90-70 Series, PACSystem RX3i, and other devices that support the Genius bus protocol. The module was previously manufactured by GE Fanuc Automation and is currently owned by Emerson Automation. The IC660BPM100 is used for voltage and current and their respective parameters. Specifically, the IC660BPM100 can be used to determine RMS voltage, current, active power, reactive power, KWH and power factor, specifically, phase to phase (star and triangle) and phase to phase (star system) of voltage; Each phase and current neutral line; Active current, power and reactive power indication per phase; Effective system power factor (PF). Each value and data calculation is updated every two (2) seconds. In addition to measuring the above parameters, the IC660BPM100 is also capable of detecting overcurrent transients with configurable thresholds. It can be installed near a machine or process because it supports the Genius communication protocol, where data captured and processed by the IC660BPM100 PowerTrac is transmitted to the host controller via the Genius bus. The IC660BPM100 converts analog measurements into digital waveforms for easy and simple parameter analysis. The device accepts three-phase voltage input ranging from 0-120VAC, 47-63 Hz; The input current is 0-5 amps and the nominal range is 47-63 Hz. It has a built-in status LED indicator that describes the device as normal and the communication as normal. The IC660BPM100 operates at 5.21 inches (W) X 11.00 inches (H) X 8.06 inches (D) or 13.23 cm (W) X 27.94 cm (H) X 20.47 cm (D). It operates at temperatures of 0 to +60 degrees Celsius or +32F to +140 degrees Fahrenheit.
GE Fanuc Genius I-O IC660BPM100 Power Monitoring block monitors voltage and current inputs and stores waveform values for each input. From these stored values, the IC660BPM100 module calculates the root mean square (RMS) values of current, voltage, reactive power, active power, KWH, and power factor. The IC660BPM100 block also measures line frequency. The IC660BPM100 block then sends these calculated values to a connected computer or PLC for analysis. The IC660BPM100 module can be used with 3-phase or single-phase systems in the Wye-Delta configuration. The module accepts current inputs from up to 3 line current transformers and one neutral line current transformer, and voltage inputs from up to 3 voltage transformers. The IC660BPM100 block can be configured using software. The module has a robust design and can be installed in electrical processes and power distribution equipment. The IC660BPM100 power monitoring block can accept inputs rated at 125 volts DC or 115 to 230 volts AC. The module can be installed at a distance of up to 7500 from its host. The module can also be used for standalone applications. The voltage input has an overvoltage rating of 300 volts peak, the transient voltage rating of 300 volts peak, and the burden of each input is less than 0.1 VA. The overcurrent tolerance of the current input is 50 amps for 5 seconds with 10 minute intervals. The IC660BPM100 blocks measure 5.21 x 11 x 8.06 inches. The block's environmental specifications include an operating temperature range of 32 to 140 degrees Fahrenheit, a storage temperature range of -40 to 212 degrees Fahrenheit, and a operating and storage relative humidity range of 50 to 95 percent. The IC660BPM100 block is rated for vibration of 1 G at 10 to 200 Hz.
