Technical specifications of IC660EBA106
Brand GE Fanuc
Series Genius I-O
Part number IC660EBA106
Type electronic assembly
Main device analog output block
Supply voltage 93-132V AC and 105-145V DC
Maximum current 250 mA (AC) and 140 mA (DC)
Frequency 47-63 Hertz
Pulsation Max 10%
Accuracy 0.15% full scale reading at 25 A °C
Thermal drift of 70 PPM per degree Celsius
The diagnosis is yes.
Operating temperature 0-60 degrees Celsius
The IC660EBA106 input module element is a current source input module element that contains only one electronic component. The electronic component assembly belongs to the GE Genius I/O family and is designed and manufactured by GE Fanuc Automation. This electronic component is used to connect the controller to different devices that provide different types of signals. These signals are analog and range from 4 mah to 20 mah. The module electronics assembly provides 6 outputs that are rated to support these signals and provide a current loop that is isolated from the different circuits in the module. The circuits of the block electronic components are the BSM circuits shared by Input 1, but at the same time, these circuits are isolated.
The GE Fanuc Automation IC660EBA106 electronic assembly is a current source input block electronic assembly with different features, such as the ability to scale circuit values to engineering values, CPU redundancy, and improved input conversion time. These features help circuits function better with the different devices connected to them. GE Fanuc Automation IC660EBA106 Current Source Input block Electronic component assembly with fault reporting function, including different types of low and high alarms. These fault reports also include input overrange and underrange reports, as well as alerts when the input current drops below 2 mah. The software for GE Fanuc Automation IC660EBA106 electronic components will depend on the device used. By default, it requires a handheld display, and if it is to be used with GE series 5 and 6 PLCS, Logicmaster software versions 4.02 and 2.01 or higher are required to function properly.
