Technical specifications for IC660EBS101
Brand GE Intelligent Platform /GE Fanuc
Series Genius I-O
Part number IC660EBS101A
Product Type Electronic Assembly
Weight 4 lb (1.8 kg)
Block to block isolation 1500 volts
The circuit LED is on the logical side of the switch
Operating temperature 0 to 60 degrees Celsius
Storage temperature -40 to 100 degrees Celsius
Frequency 47 to 63 Hz
Humidity 5% to 95% (non-condensing)
Maximum ripple 10%
Size 22.44 x 8.89 x 10.00 cm
The IC660EBS101 Electronic Component assembly is an electronic component assembly manufactured by GE Intelligent Platforms/GE Fanuc Automation as part of the Genius I/O Block family. It has 8 circuits, which are isolated inputs and outputs, and are divided into 4 different pairs. The block weighs about 1.8 kg and measures 22.44 x 8.89 x 10.00 cm. The IC660EBS101 electronics component has an "I/O Enabled" LED and a "Unit OK" LED on the logical side, with one LED on each I/O circuit. It also has a block-to-block isolation rating of 1500 volts, with a maximum heat dissipation of 16 watts for 8 inputs and 45.6 watts for 8 outputs at 2 amps. Electronic component components operate in a temperature range of 0 to 60 degrees Celsius or 32 to 140 degrees Fahrenheit and can be stored in an environment of -40 to 100 degrees Celsius or -40 to 212 degrees Fahrenheit with a humidity range of 5 to 95 percent without condensation.
GE Fanuc IC660EBS101 Electronic component assemblies operate in a voltage range of 93 to 132 volts AC or 105 to 132 volts DC, with block power control ratings up to 8 watts only. Other specifications include frequencies of 47 to 63 Hz and a 10% maximum ripple. The IC660EBS101 electronic components are compatible with a wide range of devices and can be used with any GE Fanuc Genius bus controller, QBIM or PCIe. It is compatible with backward-compatible previous versions of I/O modules, such as the IC660BBS100, IC660BBS101, and IC660CBS100 I/O modules. This electronic component can be used as a replacement part for some other electronic components. In addition, it is fully compatible with handheld monitors required to change the baud rate configuration or the IC660EBS101 block configuration for redundancy.
