Technical specifications of IC660HHC005
Brand GE Fanuc
Series Genius I-O
Manufacturer GE Fanuc/Emerson Automation
Part number IC660HHC005
Serial genius
Product description Handheld display cable
Part number IC660HHC005
Cable Type Coiled communication cable
Compatible I/O Block module All I/O block modules
The cable is 5 feet long
The IC660HHC005 is a communication cable used with a handheld monitor with catalog number IC660HHM501. Both products are designed to establish communication with the Genius IO block for parameter configuration, monitoring, diagnosis, and troubleshooting. These products were previously manufactured by GE Fanuc Automation and are currently owned by Emerson Automation. This cable along HHM equipment is a discontinued product. The IC660HHC005 is a coiled flexible black cable. One end of the cable is connected to the communication port on the left side of the top of the handheld display, while the other end connector plugs directly into the Block I/O communication port located on top of the I/O Block terminal, before the first terminal. The IC660HHC005 supports communication rates, such as 153.6 Kbaud standard, 153.5 Kbaud extended, 76.8 Kbaud, and 38.4 Kbaud. The maximum cable distance when fully extended is 5 feet or 1.5 meters and weighs 2 pounds. It works with all Genius I/O modules as well as Series 5 Genius Bus controllers, Series 90-70 Genius bus controllers, Series 6 Genius Bus controllers with diagnostics, Series 6 Genius Bus controllers without diagnostics, and Series 90-30 GENIUS Communication module, GENIUS Network Interface (GENI) module, IBM PC Interface Module (PCIM), GENIUS Network Interface (GENI) module with inverted connector, 90-70 series remote I/O scanner, 24/48VDC bus switching module (BSM), 115VAC/125VDC Bus Switching modules (BSM) and all field control products. The IC660HHC005 can be connected to the 9-pin D-shell handheld monitor interface of the target module at any time without interrupting the genius I/O network, however, care must be taken when inserting and disconnecting cable connectors to prevent vibration and shock.
The IC660HHC005 Handheld display cable belongs to the GE Fanuc Genius I/O series of I/O modules and accessories. It is a detachable plastic coil communication cable that can be used to communicate with Genius Handheld displays (HHM) and Genius I/O modules. This black cable is designed for the IC660HHM501 handheld monitor. It is five feet long and weighs two pounds. The communication data rate of the module is 153.6kbaud standard and 153.5kbaud extended. It can be used to read data from specific memory locations in GE Series 90-70, Series 6, and Series 5 PLCS using handheld displays. One end of the IC660HHC005 cable can be connected to the HHM, and the other end must be connected to the Genius I/O module or bus connector. The IC660HHC005 handheld display cable is designed for easy connection to the Genius I/O module. It also has the ability to configure modules online or offline using an appropriately terminated serial bus. This coiled cable provides an electrical path for normal communication. If a user must add a new device to an existing system or bus, the module must be configured offline. When configured online, only one handheld monitor must be connected to the serial bus to automatically detect reference addresses without conflicting with other devices and PLCS. If the user needs to mount the display behind the panel using a metal mounting bracket, a notch must be laid out in the panel and the display connector must be installed where the HHM's communication cable can reach it. The connector facilitates permanent installation of the HHM, which has terminals for bus cables and coiled communication cables for handheld displays.
