Technical specifications for IC693BEM333
Brand GE Fanuc
Series Series 90-30
Part number IC693BEM333
Component Type Remote FIP interface
Communication Protocol Factory Inspection Protocol (FIP)
Number of serial ports 2
Serial port Type D 9-pin connector
Transmission speed 1 MHZ
Number of status leds 4
RX3i System compatibility Not supported
IP Level Protection level 20
The GE Fanuc IC693BEM333 Remote FIP interface module connects the GE Fanuc series 90-30 programmable logic controllers (PLCS) to industrial control networks with Factory Instrumentation Protocol (FIP). It comes out of the factory with a data transfer speed of 1 MHz. The power connection to the GE Fanuc IC693BEM333 Remote FIP interface module is located on the back of the device, and its installation in the 90-30 series PLC backplane is simple. The user simply plugs the module into any available slot in the case, with the exception of slot 1, which is reserved for CPU modules. There are 2 serial ports, both Type D connectors, 9 connection pins on the front of the module, and 4 status leds labeled CD1, TEN1, CD2, and TEN2 can also be found.
Process information from analog, discrete and special field devices can be transmitted via the FIP bus and transmitted to the host controller, in this case the GE Fanuc series 90-30 PLC, in order to monitor and control various industrial processes and machinery. The GE Fanuc IC693BEM333 Remote FIP interface module is incompatible with the RX3i system. The GE Fanuc IC693BEM333 Remote FIP interface module has an open construction design and is not suitable for working outdoors or in industrial environments with high humidity, high temperatures and a lot of dust or dirt. Placing the GE Fanuc IC693BEM333 Remote FIP interface module in the panel, preferably with climate control, will guarantee a longer machine life and reduce downtime due to harsh environmental conditions.
