Technical specifications for IC693CBK001
Brand GE Fanuc
Series Series 90-30
Part number IC693CBK001
Type cable kit
Functional high-density cable
Cable two. Right and left end (IC693CBL327-328)
Compatibility 32-point I/O module
Connector Fujitsu FCN-365S024-AU
Connector type 24-pin connector/set of stripper ends
Rated current 1.2 amps per conductor
Length 10 feet (3 meters)
Kit 1 per module (two cables per module)
Enhancement reduces the required clearance space in front of the PLC.
Product life cycle status * Discontinued/obsolete
The IC693CBK001 cable kit is a cable kit designed and manufactured by GE Fanuc Automation. The kit is included in the GE Series 90-30. The cable kit consists of high-density I/O cables connected at right angles. High-density cables are designed to provide secure connections to high-voltage circuits. The cable kit is designed to work with high-density I/O modules from the same manufacturer and family. The GE Fanuc Automation IC693CBK001 cable kit consists of 2 pairs of cables, the left cable (IC693CBL327) and the right cable (IC693CBL328). These two cables are specifically designed to connect 32-point I/O modules via two 24-pin connectors located on the front of the module. These connector cables have a 24-pin connector on one end and a set of peeled ends on the other. Each of the 24 pins or conductors is rated at 1.2 amps. This current rating needs to be modified when used with a 16-point output module.
GE Fanuc Automation Series 90-30 IC693CBK001 Cable kits are useful when connecting to an I/O module after installing a general purpose terminal or tape, or when using the direct mounting method. In addition, for modules with dual 24-pin connectors, this is also useful for cables. The GE Fanuc Automation IC693CBK001 cable kit has a length of 3 meters for both the right and left I/O cables. These right Angle connector cables are used to replace the old straight connector cables that were previously installed on the right and left side of the I/O module. The GE Series 90-30 32-point I/O modules that are most compatible with this cable suite are the IC693MDL654, 655, 752, and 753 GE Series 90-30 I/O modules.
