Technical specifications for IC693CBK004
Brand GE Fanuc
Series Series 90-30
Part number IC693CBK004
Type cable kit
Features High-density cables for TBQC components
Cable two. Right end and left end (IC693CBL333-334)
Compatibility 32-point I/O module
Connector Fujitsu FCN-365S024-AU
Connector type 24-pin connector/set of stripper ends
Rated current 1.2 amps per conductor
Length 0,5 m
Kit 1 per module (two cables per module)
Enhancement reduces the required clearance space in front of the PLC.
Product life cycle status * Discontinued/obsolete
The IC693CBK004 cable kit is a high-density cable kit designed to connect GE Fanuc Automation's 32-90 series 30-point I/O modules. High-density devices typically operate under high tension and voltage, which means that the kit requires specific construction and design to support such operations. The kit contains 2 cables, which are identical in terms of design, except that one is for the right side and the other is for the left side of the module to which they are connected. Each module requires one of the kits (2 cables) to connect properly. GE Fanuc Automation IC693CBK004 high-density cable suites equipped with a right cable (IC693CBL333 cable) and the left cable (IC693CBL334 cable), the length of each cable is 0.5 meters, is the shortest suite cable in the series.
The correct cable for GE Fanuc Automation IC693CBK004 High density cable kit needs to be used with the terminal quick connect assembly. These cables are equipped with a 24-pin connector for use with 32-point I/O modules and are adapted for use with 16-point I/O modules for such operations. Each conductor in the cable is rated at 1.2 amps and needs to be derated according to the specifications of the module to which it is connected. GE Fanuc Automation IC693CBK004 High density cable kit with Fujitsu connector for terminal quick connection block. The cable connector can extend up to 2 inches from the surface of the 90-30 series module. The depth of the cabinet should allow this connector to increase the required depth by 2 inches.
