Technical specifications of IC693CPU341
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Manufacturer GE Fanuc; Emerson Automation (Current) Emerson Automation (current)
Part number IC693CPU341
Product Description Modular CPU
Series Series 90-30
Product Type CPU module
User memory 80 KB
Part number IC693CPU341
Clock speed 20 megahertz
Processor type 80188
Product Description Single-socket CPU
User memory 80 KB
Typical scan rate is 0.3 ms per 1K Boolean logic
Nooooo. Number of support plates five (5)
Microprocessor 90C188XL
The processor speed is 20 MHZ
Clock speed 20 MHZ
The IC693CPU341 is a single-socket CPU formerly manufactured by GE Fanuc Automation and now owned by Emerson Automation. The CPU is an 80C188XL, 20 MHz processor with a Boolean execution speed of 0.3 milliseconds per 1K logic (Boolean contacts). It is a modular hardware type with a built-in user memory capacity of 80 KB and supports up to 512 discrete inputs, 512 discrete outputs, 1024 analog input words, and 256 analog outputs. In addition, the IC693CPU341 also has a built-in 1280-bit discrete global memory (%G); 1024-bit internal coil (%M); 256-bit output (temporary) coil (%T); 128-bit system status reference (%S, %SA, %SB, %SC) with 32 bits and 9999 words of register memory (%R) per storage area. This CPU has more than 2000 timers and supports shift registers, interrupt, and override instructions. It has a battery-powered clock and is compatible with PCM/CCM memory. The IC693CPU341 has no embedded memory, but a serial communication port that supports SNP and SNP-X protocols is hosted by the power module. In addition, the IC693CPU341 supports optional communication modules including Ethernet, FIP, Profibus, GBC, GCM and GCM+ option modules. The IC693CPU341 supports configuration of up to five backboards, including one CPU backboard and four (4) expansion and/or remote I/O backboards. The CPU requires a 490 VDC power supply to provide 5 mA of current, while the operating temperature requirements are 0 to 60 degrees Celsius or 32 to 140 degrees Fahrenheit.
The IC693CPU341 module is a GE Fanuc CPU module with a clock frequency of 20 MHZ. The IC693CPU341 module is designed and developed for the 90-30 series programmable logic controllers. The user memory provided on the IC693CPU341 module is 80 KB. Earlier versions of the module supported RAM and optional EPROM or EEPROM. Starting with hardware version IC693CPU341-J and firmware version 4.61, this CPU module only supports RAM and optional flash memory. The IC693CPU341 module can be installed in slot 1 of the 5-slot baseboard system. The microprocessor on which the module is based is the 90C188XL microprocessor. The power requirement for this module is 490 MA (5 volts DC). The average scan rate per 1K logic module is 0.3 ms. The IC693CPU341 module supports a total of 512 discrete outputs and 512 discrete inputs. Register memory is 9999 words. The integrated serial port on the IC693CPU341 module uses an interface connector located on the PLC power supply. Optional network communication modules available include Ethernet, GBC, and FIP modules. GE Fanuc offers two types of CPU modules for the 90-30 series PLC, namely modular and embedded cpus. Embedded CPU models include Type 311, Type 313, and Type 323. The main advantage of embedded cpus is their relatively low cost. Modular cpus, on the other hand, are less cost-effective, but they offer higher performance than embedded cpus. Modular cpus include Model 331 and higher. All modular cpus, including the IC693CPU341 module, are installed in slot 1 of the PLC baseboard. Except for special option modules, slot 1 cannot be used for module types other than CPU modules.
