Technical specifications for IC693MCM001
Brand GE Fanuc
Series Series 90-30
Part number IC693MCM001
Manufacturer GE Intelligent Platform
Product Type Digital servo interface module
It weighs 3.00 pounds
Compliance with EN 61000-4-2 standard
Servo loop update 2 milliseconds
Block processing <5 seconds
Memory non-volatile flash
For programmable controllers
Input 16 points
It can also be used as a Power Mate J interface module
The IC693MCM001 module is a digital servo interface module manufactured by GE Fanuc/GE Intelligent Platforms as part of the 90-30 series product line. The module shall be installed in a control system according to EN 61000-4-2. The 90-30 series PLC system requires this module to be installed in a metal housing that provides a metal-to-metal connection to ensure security around the door. The IC693MCM001 module also requires a continuous shielded servo command cable, which should be clamped at both ends using a high-frequency ground cable. Since this module is also a Power Mate J interface module, only standard operations are supported. It provides motion programs, position control, and input and output interfaces. The mode also provides a link to the digital servo system as well as digital torque and speed control.
The 2-axis version of the GE Fanuc IC693MCM001 interface module has a servo loop update time of 2 milliseconds and a block processing time of less than 5 seconds. It is easy to use and the configuration software has non-volatile flash memory that can store 40 subroutines and 10 programs. The IC693MCM001 module allows users to extend the programming unit, including the transfer of automatic data between the Power Mate J and the PLC table, without the need for user programming. The module features multifunctional I/O as well as position capture strobe inputs for every axis with operator-specific control inputs. When using this module with Power Mate J, version 3.52 or later should be used with the IC693 CPU firmware. In addition, version 6.01 or later of the IC641 software is recommended.
