Technical specifications for IC693MDL641
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL641
Type input module
Logical negative
Rated voltage 24 volts DC
Input voltage 0 to 30 VDC
Input 16
1500 volts RMS between the isolated field side and the logical side
Input current 15 to 30 VDC
Power consumption 5 to 120 volts
Led 16
Response time 7 ms (typical)
The IC693MDL641 module is an I/O module designed and manufactured by GE Fanuc Automation and included in GE PLC's 90-30 series product line. These families include different devices that can conform to the entire application operation process involving the PLC and all its accessories, including wiring. This particular module is designed as an interface between the PLC and external input devices such as buttons, sensors and contractors. The GE Fanuc Automation IC693MDL641 I/O module runs with negative logic and comes with 16 inputs. The module has a rated voltage of 24 volts DC and a total voltage range of -30 to 30 volts DC.
The GE Fanuc Automation IC693MDL641 I/O module includes different LED indicators for each input and tabs showing whether the input is currently on or off. If there are any problems with the input, it will also be displayed here. The module has an on-voltage range of 15 to 30 volts DC and a turn-off voltage range of -30 to 5 volts DC. It also has a minimum current of 4 MA (on) and a maximum current of 1.5 MA (off). The user needs to provide power for the GE Fanuc Automation IC693MDL641 I/O module. The module is rated at 5 volts, including all inputs when operating on the backplane, which consumes 120 volts of power from an isolated 24-volt backplane bus or a user-supplied power supply. It is recommended to install this module in a clean and dry place without any corrosive substances or gases to avoid problems during operation.
