Technical specifications of IC693MDL731
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL731
Power Supply Type DC
Output voltage range 12 to 24 volts DC
The load current at each point is 2.0
Response time (ms) 2 ms
The number of points for each ordinary card is 8
Output type transistor
Negative polarity
Product life cycle status * Discontinued/obsolete
The IC693MDL731 module is a discrete output module manufactured by GE Fanuc. The IC693MDL731 module has 8 circuit outputs and it is a discrete output module rated at 12 to 24 volts DC. The module has a DC power supply with an output voltage range of 12 to 24 volts DC. The device has a load current of 2.0 amps per point and a response time of 2 milliseconds when turned on or off. The IC693MDL731 module has a transistor output type with a negative polarity rating. Each common end of the assembly has 8 points, the connector type is a terminal, and each module has 20 screws. The internal power is 55 MA (5 volts DC). The input voltage range is rated at 24 volts DC, while the on-off voltage is a minimum of 15 volts DC. The element has a maximum off state voltage of 6 volts DC and a minimum on-current of 4.5 MA.
The GE Fanuc IC693MDL731 module should be installed safely at all times and the installer should ensure that it is installed in an appropriate protective cover. In addition, the equipment should use an application to function properly, and the installer should also ensure that it is properly grounded. The ground conductor should always be connected in a tree shape, branching out to the central ground point. In addition, the grounding conductor should be as short and large as possible. The IC693MDL731 module has an aluminum PLC baseplate for module shielding ground. Cpus with external port connections in the PLC must have separate shielded ground connections to ensure proper shielding of the ports.
