Technical specifications for IC697CSE784
Brand GE Intelligent Platform /GE Fanuc
Series 90-70 series
Part number IC697CSE784
Module type Scalable floating-point CPU
Microprocessor 16 MHZ
Slot One single slot
Required current 1.6 amps
Serial ports 1 RS422 and RS485
Point 12K any combination of input and output
Bit 32 bit
Supported I/ OS IC660/IC661 I/O and IC697 I/O
LED indicator Yes
GE Fanuc manufactures the IC697CSE784 scalable floating-point state logic CPU as part of the 90-70 series product line. The module can be programmed using different types of programming logic to enhance real-time control of machines, material handling systems and application processes. The IC697CSE784 module has RS-422 and RS-485 serial ports and is compatible with different programming and communication purposes. It also has VME, a system designed to provide support for the VME standard C.1. The module has an internal timing accuracy of ±3.5 seconds per day and a maximum elapsed time clock rating of ±0.01%. When testing modules, the operator needs the IC697CSE784 module, power supply, and slot rack to properly test. When there is a problem with the processor, the LED at the top goes off or flashes.
GE Fanuc Series 90-70 IC697CSE784 Scalable floating-point state logic cpus allow programming in relay ladder logic, state logic, and ics, enabling them to perform a variety of applications. If the user suspects a problem with the IC697CSE784 CPU, it should be left on in run mode overnight or for at least 24 hours to see if it remains on in run mode. If it does not stay on while in running mode, the user may need to repair it. This state logic CPU is a 32-bit CPU that has a 16 MHZ microprocessor. The LED at the top of the device indicates that the device is operating normally, the second LED indicates that the device is in running mode, the third LED is used to indicate that the CPU is output enabled, and the fourth LED is the "memory protection LED".
