Technical specifications for IC697MDL651
Brand GE Fanuc
Series 90-70 series
Part number IC697MDL651
Rated voltage 5 volts DC
Input voltage range -3 to 7 volts DC
Required current 0.53 amps
Number of inputs per module 32
Cable length up to 30 m (98.4 ft)
Isolation voltage 1500 volts
On-voltage -3 to 0.5 volts
OFF state voltage 2 to 7 volts
Conducting current (typical) 1.7 MA
OFF State current (Max) 1.1 MA
The IC697MDL651 module is a discrete input module specially manufactured for industrial systems and consists of various high-level operating elements. The module is produced by GE Fanuc and is intended for use with programmable controller units in the 90-70 series. The IC697MDL651 module has a fully independent TTL-compatible input point with filter options. The user can select a filter with a value of 1 millisecond or 10 millisecond depending on the application requirements. In addition to this, the input has a pull-up resistor that does not require power, and the module has an LED status indicator. Each module has 32 inputs available and uses a maximum cable length of 30 meters (98.4 feet).
The IC697MDL651 module requires a voltage of 5 volts DC, which ranges from -3 to 7 volts DC. In addition, the input characteristics of the module include an impedance of 5.9 kΩ, a deviation of plus or minus 5%, and an on-off voltage range of -3 to 0.5 V. The off-state voltage is 2 to 7 volts. The typical conduction current of the IC697MDL651 module at rated voltage is 1.7 MA and the maximum turn-off current is 1.1 mA. The module requires 0.53 amps of current and 5 volts of bus voltage and is designed according to the VME standard (C.1). The configuration of the IC697MDL651 module can be achieved by software running on Windows or MS-DOS operating systems. The configuration is completed through Ethernet TCP/IP or SNP port.
