Part number :DS200DTBAG1AAA
Series: Mark V
Manufacturer: General Electric
Manual :GEH-6353 Mark V LM Speedtronic Turbine Control Panel manual
Product Type: Digital contact terminal board
Functional acronym/abbreviation :DTBA Corporation
Manufactured by General Electric and belonging to the Mark V series, the DS200DTBAG1AAA features two terminals that can connect up to 95 wires. The device also has five jumpers and two 2-pin connectors. Terminals connect signal cables to send and receive information used by drivers. The GE digital contact terminal board DS200DTBAG1AAA requires up to 190 wires, so you must be aware of possible damage to other components and circuit boards. The screwdriver is used to loosen the terminal to remove the wire, which means it could hit or scratch other components when unloading. To prevent this, use one hand to guide the screwdriver to the terminal you want to release.
When you remove the signal wires from the DS200DTBAG1AAA, try to move them to the side and away from the other boards. If possible, reinstall the signal cable before installing the replacement board to limit the chance of damaging the fragile board in the drive. If you can connect wires, hold the board only from the side and use both hands. Carefully place the board into the cabinet and align the holes with the holes in the rack where the board is to be mounted. When replacing it, you must wear the wristband and attach the end of the wristband to the unpainted metal structure.
The DS200DTBAG1AAA is a digital contact terminal board with a variety of functions and features.
First of all, it is equipped with 5.1 inch 240x128 dot-matrix graphic LCD display, with LED backlight, rich picture and large amount of information. This design makes the display content more clear and intuitive, convenient for users to obtain the required information.
Secondly, DS200DTBAG1AAA adopts the speed and performance microprocessor based on ARM, which can simultaneously realize the detection, recording, display and alarm of 8 signals. This allows it to efficiently process multiple signals and send out alarms in a timely manner when needed.
In addition, the terminal board uses a large-capacity Flash flash chip to store historical data, ensuring the reliability of data storage for extraordinary time, even in the case of power failure, no data will be lost. The fully isolated input design enables it to access a variety of signals without the need for hardware replacement, which can be achieved through instrument configuration.
The DS200DTBAG1AAA also has a wide range of engineering quantity display values, with cumulative values up to 4294967295. At the same time, it also supports Chinese menu configuration, display channel number, engineering unit, flow accumulation, temperature and pressure compensation, etc., software password lock to protect user configuration security.
In addition, the DS200DTBAG1AAA has two terminal terminals that can connect up to 95 wires each, for a total of five jumpers and two 2-pin connectors, making it able to handle a large number of wire connections.
In summary, the DS200DTBAG1AAA is a feature-rich, high-performance digital contact terminal board that is widely used in a variety of applications that need to handle a large number of signals and data storage.
