Brand :GE Fanuc
Series :90-30 series
Manufacturer :GE Fanuc (former); Emerson Automation (Current)
Part number: IC663PTM101
Series :90-30 series
Product description: Power sensor module
Description: Power sensor module
Voltage :10-120 volts AC
Mounting: Any 90-30 series baseplate
Compatible Series 90-30 CPU: Any CPU module
Current 0-7.5 amps
The frequency is 35-70 Hertz
Operation mode: single mode; Three-phase mode; Synchronous monitor mode
The IC693PTM101 is a power sensor module that is part of Emerson Automation's 90-30 series platform, which was previously provided by GE Fanuc Automation. The module is mainly used to realize the power consumption analysis and voltage monitoring between the generator and the distribution network. It is a highly intelligent device that can be programmed to operate in single mode, three-phase mode, and synchronous monitoring mode to perform a variety of functions. The module is mounted on the Serie 90-30 baseplate. It is designed to be connected to current and potential transformers for data calculation. The module consists of three (3) parts, specifically, a processing module, an interface board, and an interface cable. It can be used in Wye or Delta three-phase power supply systems or single-phase power supply systems. The IC693PTM101 can be used to accurately measure root mean square (RMS) values of voltage and current and calculate power, power factor, frequency, energy and total demand as well as three-phase connections in 15 minutes. In essence, the module can cover the functions of the power meter, however, with additional modes of operation and functions and the ability to connect directly to the PLC, thus simplifying data integration and making it easy to perform. The module can also perform data reporting and fault monitoring. It can also be used for generator-fixture synchronization functions and to perform demand loss cost reduction and load reduction requirements. The IC693PTM101 is compatible with all types of 90-30 series PLC cpus. The processor module can be installed on any substrate, whether CPU, expansion or remote substrate, providing maximum flexibility to the user and potentially eliminating cable overlength.
The IC693PTM101 module is a single-phase power sensor module manufactured by GE Fanuc. It is a 90-30 GE series device widely used in industrial automation. It comes with a processing module, an interface board and an interface cable. It is used to establish a connection between the power sensor and the input transformer. The data generated by this module can be further used by the PLC for reporting, fault monitoring and deceleration/load shedding applications. The input voltage of the IC693PTM101 module is rated between 10 and 120 volts AC. Its current rating is between 0 and 7.5 amps. The sensor module is rated at 35 to 70 Hz and has 0 outputs. The backplane isolation voltage of the module is 1500 volts. It dissipates as heat with a total power of 4 watts.
The IC693PTM101 module has enhanced data processing capabilities. It is capable of processing and processing data at incredible speeds and is capable of performing data calculations in 50 milliseconds when running at 20 Hertz and 60 milliseconds when running at 16.67 Hertz. It has low latency and data processing frequencies between 50 and 60 Hz. All data is measured and analyzed according to the active and reactive power of each phase.