Part number: IC200BEM003
Description: VersaMax main module
Data :3854 Input/output
Data rate: 9.6k baud rate to 12M baud rate
Connector: 9-pin D-sub
The IC200BEM003 module is the main Versamax module designed by GE Fanuc. It can easily send/receive data on V1 PROFINET network. It supports variable data rates. A total of 3584 bytes of input data and 3584 bytes of output data can be processed using this module. The module has sync and freeze modes. The data rate range of the network interface module is 9.6k baud and 12 M baud. The IC200BEM003 module uses a linear bus network topology that is terminated at both ends. It uses shielded twisted cables for data and information transmission. The network module is connected using a 9-pin D-sub connector. It is small and compact in size, measuring 4.3 inches wide, 2.63 inches high and 1.956 inches deep.
The Versamax IC200BEM003 module is a smart module with functions such as slave status array table and slave diagnostic address. It consumes a total of 450 milliamps of current from the 5 volt output. The IC200BEM003 module can be configured using a host controller with a software utility for the Windows operating system. The front of the module has an LED indicator that lights up when there is communication activity. The IC200BEM003 module supports up to 125 slave devices and can be configured with software. The network to the frame ground isolation is rated at 250 volts AC and the PROFIBUS network to the backplane is rated at 1500 volts AC for 1 minute. The module is UL certified for installation in hazardous areas.
IC695CRU320 | Redundant processor
IS230TVBAH2A | GE General electrical controller
IS200WNPSH1ABA MRP708215 |GE Printed circuit board
IC695CRU320-BB| GE Redundant CPU
IC697CPX928-CD | GE central processing unit function
IC698CPE030 | GE Fanuc RX7i series CPU
IS215UCVEM10A | GE controller
IC698CRE030| GE Redundant Ethernet processor
IS200TVBAH2ACC MRP702115 GE Small vibration monitoring card
323A2374P3 | GE Drive system display miniature terminal control products
DS200AAHAG1AD (AAHA) | Use the connector board
DS200ACLEH1 | GE Mark V board components
