The GE Fanuc 90-30 module whose directory number is IC693CPU351 belongs to the modular CPU subcategory. The CPU is designed for applications that require higher complexity, faster processing speed, and support for large amounts of I/O. The module is a single-slot CPU module designed to be mounted on a 5 - or 10-slot CPU baseboard.
The IC693CPU351 supports a large number of I/ OS, especially 2048 discrete input points (%I). 2048 Discrete output points (%Q) and analog I/O words vary depending on the software used, but the maximum configurable analog I/O is 32,640 words. The number of other internal registers available for this CPU is 1280 bits of binary global memory; 4096-bit storage coil; 256-bit temporary output coil; 128-bit system status reference; Register memory of up to 32,640 words and system registers of 28,000 words are available for reference table viewing only.
The modular CPU can be configured for I/O expansion or communication and performing I/O data exchange between remote I/O baseboards. Specifically, seven (7) and/or I/O extensions or remote I.O baseboards. For communication with visualization systems such as Human Machine Interface (HMI) or Supervisory Control and Data Acquisition System (SCADA), as well as other automation devices, the IC693CPU351 is equipped with three (3) serial ports. One (1) serial port is located on a power connector that supports SNP/SNPX slave stations, while ports 1 and 2 support RTU slave stations and SNP/SNPX master/slave protocols. The modular CPU also supports the installation of communication modules.
The GE Fanuc IC693CPU351 CPU is a modular CPU module. The IC693CPU351 CPU was developed specifically for use in the 90-30 series Programmable Logic controller (PLC) systems. The CPU has a clock speed of 25 megahertz. The processor type is 80386EX processor. The IC693CPU351 CPU is part of the GE350 to 364 CPU family, which is designed to meet customer needs for faster processing speed and greater memory capacity. Logicmaster microprogramming and configuration software versions 90-30, 6.0 and higher, and control programming and configuration software versions 2.0 and higher support IC693CPU351 cpus. The user memory on the IC693CPU351 CPU is 240 KB (supported by CPU firmware 9.0 and later). For firmware before version 9.0, the CPU module memory size is 80 KB.
IC695CRU320 | Redundant processor
IS230TVBAH2A | GE General electrical controller
IS200WNPSH1ABA MRP708215 |GE Printed circuit board
IC695CRU320-BB| GE Redundant CPU
IC697CPX928-CD | GE central processing unit function
IC698CPE030 | GE Fanuc RX7i series CPU
IS215UCVEM10A | GE controller
IC698CRE030| GE Redundant Ethernet processor
IS200TVBAH2ACC MRP702115 GE Small vibration monitoring card
323A2374P3 | GE Drive system display miniature terminal control products
DS200AAHAG1AD (AAHA) | Use the connector board
DS200ACLEH1 | GE Mark V board components
