The IC694TBB032 is a terminal assembly, mainly belonging to the PACSystem RX3i Programmable Automation controller (PAC) series. The series was previously produced by GE Intelligent Platforms (GE IP), but was recently acquired by Emerson Automation. The module is a 36-pin box terminal with screw connections. The IC694TBB032 is designed for use in high-density I/O modules, especially discrete input and output modules. It is also compatible with certain 90-30 series I/O modules.
The terminal assembly consists of two (2) parts, namely, the module cover and the terminal itself. These components are assembled together and then connected to the I/O module. Recommended wire sizes for signal terminations must be # 14-26 American Wire Gauge (AWG), solid or stranded copper wire. Each conductor must be stripped from the tip to a maximum length of 0.310 "o7 7.87 mm to be properly terminated. A stripping reference is also provided at the bottom of the terminal to conform to the recommended stripping length. Each connection must be tightened to 7 LBS. Detachable terminals such as IC694TBB032 are designed to provide modularity and ease of maintenance. In the event of module failure, electronic components can be easily replaced without removing existing connections. This effectively reduces module downtime or maintenance time and simplifies troubleshooting methods, however, it is recommended to disconnect the power from the module during replacement of electronic components to prevent possible equipment damage.
The GE Fanuc IC694TBB032 terminal is a terminal of the RX3i series. It is equipped with 36 pins for connection. The front of the module has a terminal door, and the back end of the module adopts an open architecture design. The outer cover of the block has a thicker insulation layer than the inside to accommodate thicker wires. Terminals are box terminals made of high quality materials. It is a high-strength and compact component. The box terminals have a depth of 0.5 inches and are capable of holding 0.31 inches of ribbon wire. The IC694TBB032 terminals can be used with high-density modules and I/O modules. The box has screw terminals for connection.
