Model: IC695CHS012
Baseboard options: Controller base and Ethernet expansion base
Internal power supply, 3.3VDC 600 MA
Internal power supply, 5VDC 240 MA
How to exchange support: Yes
Backplane support: Supports PCI and high-speed serial
Dimensions (H x W x D) : 141.4 x 457.2 x 147.3 mm (5.5 x 18 x 5.8 inches)
Install the required minimum clearance on all sides of the 102 mm (4 in) backplane
Brand GE Fanuc
The IC695CHS012 is a PACSystem RX3i backplane. The backplane has 12 slots and supports high-speed peripheral component interconnection (PCI) and serial bus connectivity. The backplane is a necessary component because it provides the housing and connections for the RX3i module. It also hosts the communication bus, where internal communication occurs between modules.
The power consumption of the IC695CHS012 is 600
[email protected] and 240 mA@5VDC. It has physical dimensions of 18.01 x 5.57 x 5.80 (457.5 x 141.5 x 147.32) and supports horizontal installation. It can be installed in a housing offering IP20 / NEMA/UL Type 1 protection. To cool naturally and promote adequate air circulation, the backplane must have a gap of 102 mm or 4 inches on all sides of the hardware. For ATEX Zone 2 hazardous zone requirements, the IC695CHS012 must be installed in an IP54 or higher housing that is mechanically strong enough to withstand 3.5 joules of impact energy.
The IC695CHS012 supports modules or removable hot-swappable and power-off inserts. This provides a clear advantage as it effectively reduces downtime and allows maintenance activities such as module replacement and integrity verification to be carried out without affecting the current operating mode of the connected controllers and modules. In addition, the backplane supports the installation of optional backboards, such as controller mounts and Ethernet expansion mounts.
IC695CRU320 | Redundant processor
IS230TVBAH2A | GE General electrical controller
IS200WNPSH1ABA MRP708215 |GE Printed circuit board
IC695CRU320-BB| GE Redundant CPU
IC697CPX928-CD | GE central processing unit function
IC698CPE030 | GE Fanuc RX7i series CPU
IS215UCVEM10A | GE controller
IC698CRE030| GE Redundant Ethernet processor
IS200TVBAH2ACC MRP702115 GE Small vibration monitoring card
323A2374P3 | GE Drive system display miniature terminal control products
DS200AAHAG1AD (AAHA) | Use the connector board
DS200ACLEH1 | GE Mark V board components
