Brand :GE
Model :IC800SSD104RS1-DC
Country of Origin: USA
Part of GE Fanuc Automation's larger VersaMotion series, the IC800SSD104RS1 is a 4.3-amp 52K series servo amplifier with gyrofeedback
With 115/230 VAC 52K, it is suitable for the following controllers :IC800SSI104RS1, IC800SSI104RD2 and IC800SS1104RP2. The device has an extension! PI /0, you need an S series
Column servo motor.
The amplifier includes a two-character diagnostic LED, a robust power module, a command signal, torque limit analog input, user-configurable quadrature encoder output, and strings from the S-Series co-service motor
Line encoder feedback, sinusoidal rectification for smoothing speed and minimum torque fluctuations, pulse neutralization direction, orthogonal encoder or cw/cw pulse input format for position control mode, and at the bottom of the unit
Part of the AC power input and motor connection for isolating electrical noise weighs 3.6 pounds and measures 6.05 inches (D)x 3.20 inches (W)x8.50 inches (H). The position feedback connector depth is 1.26
Inches. Operating range is 10 VDC, resolution is 12 bits, output current is 5 mA, input voltage range is +5 to +15 VDC, line count frequency is up to 3 MHz. When using a 4x multiplier,
The pulse frequency is up to 12 MHz and the output voltage is +5 VDC.
For the analog output IC800SSD104R51, the operating range is 10 VDC, the resolution is 8 bits, and the output current is 5 mA. The operating temperature of the free air environment must be 0 to 50 ° C, stored and transported
The temperature must be -40 to 80℃. The housing is open. The amplifier must be mounted vertically for cycling through the heat sink and has an RS-232 serial communication multipurpose programming port on the amplifier.
RS-232 has a maximum range of 50 feet and a communication rate of 9600 baud:
IC695CRU320 | Redundant processor
IS230TVBAH2A | GE General electrical controller
IS200WNPSH1ABA MRP708215 |GE Printed circuit board
IC695CRU320-BB| GE Redundant CPU
IC697CPX928-CD | GE central processing unit function
IC698CPE030 | GE Fanuc RX7i series CPU
IS215UCVEM10A | GE controller
IC698CRE030| GE Redundant Ethernet processor
IS200TVBAH2ACC MRP702115 GE Small vibration monitoring card
323A2374P3 | GE Drive system display miniature terminal control products
DS200AAHAG1AD (AAHA) | Use the connector board
DS200ACLEH1 | GE Mark V board components
