Technical specifications for IC660BBA023
Brand GE Fanuc
Series Genius I-O
Part number IC660BBA023
Product description Thermocouple input module
Nooooo. Input 6
Block power supply 24/48 V DC
Heat dissipation 9 watts
Block to block isolation 1500 volts
Group to group 300 volts
Voltage measurement -25 mV to 150 mV
Accuracy 8 Hz
Status LED Unit OK, I/O enabled
Dimensions (HxWxD) 8.83x3.34x3.91 inches
Weight 4 pounds
The IC660BBA023 thermocouple module is a 24 - to 48-volt DC rated 6-channel thermocouple input module designed by GE Fanuc. It provides up to 9 watts of heat dissipation during operation. The power supply is rated from 24 to 48 volts DC, with a maximum ripple of 10% and a power supply voltage drop time of 10 milliseconds. The 6 input circuits on the module are divided into 3 groups, each group consists of a thermocouple input circuit and a remote cold end compensation input. The input voltage on the IC660BBA023 thermocouple input module is measured from -25 mV to 150 mV, with an accuracy of 8 Hz for the input channel at 25 degrees Celsius.
The IC660BBA023 thermocouple module responds to open circuit detection in less than 5 seconds. It also has a typical input update time of 2 seconds and a maximum update time of 3 seconds. The internal cold input has a temperature range of 0 to 60 degrees Celsius, a resolution of less than +/- 0.01 degrees Celsius, and an accuracy of +/- 0.1 degrees Celsius. The processor of the module is responsible for converting the cold junction temperature value to the voltage value. If the module's CPU is IC697CPU731, IC697CPU771 or later, and the programming software is version 2.02 or later, it is compatible with GE IC697 series PLC. During installation, ensure that sufficient airflow is allowed for air cooling. The ambient operating temperature of the module is 0 to 60 degrees Celsius and the relative humidity range is 5 to 95%. The 24 to 48 volt DC power supply can be connected to terminals 5 and 6 of the IC660BBA023 thermocouple module.
