Technical specifications for IC660BBA025
Brand GE Fanuc
Series Genius I/O
Manufacturer Emerson Automation/GE Fanuc (ever)
Part number IC660BBA025
Part number IC660BBA025
Product description analog output module
Nooooo. Output six (6) analog outputs
Nooooo. Output 6
Each ordinary card counts a group of 6 people
Output accuracy 0.15% of full scale reading
Output signal 4-20 MA
Output resolution 6 microamps
Supply voltage range 18-56 volts DC
Output update frequency 25 ms
Communication protocol Genius protocol
Block power supply 24/48V DC
Resolution 6μA
Cooling 12 watts
Update rate 25 ms
Status The LED unit is normal and I/O is enabled
The IC660BBA025, also known as the Block I/O module, has a rackless design and can be installed in a housing to provide appropriate protection for industrial components. The module is equipped with LED status indicators, such as leds for device health and I/O enabled. It comes with a block-to-block isolation rated at 1500V for one minute. The module also provides internal diagnostics to detect Underrange, Overrange, and Feedback errors. Each channel of the IC660BBA025 has a resolution of 6μA, an output accuracy of 0.15% of a full-scale reading, and an output update frequency of 25ms. In addition, the module has a thermal drift of 35 PPM per degree Celsius. The IC660BBA025 has an operating temperature of 0 ° C to +60 ° C (+32 ° C to +140 ° F), a storage temperature of -40 ° C to +100 ° C (-40 ° C to +212 ° F), a relative humidity of 5-95%, and no condensation. It must be installed on a plane that vibrates no more than 5-10 Hz, 0.2 inch (5.08 mm) displacement, and 10-200 Hz at 1G. The IC660BBA025 also has configurable output properties that are ideal for processes. This includes keeping the output in its last state or default, scaling to the engineering value, CPU redundancy, and checking for output feedback. In addition, fault reporting can be disabled or enabled by circuit. This method is useful if some channels are to be configured for specific signals to be used when modifying the system in the future.
The IC660BBA025 current source output module is a 24 to 48 volt DC current source analog output module manufactured by GE Fanuc. It comes with six separate output circuits for devices receiving signals rated from 4 to 20 mA. The isolated output circuit is shared with the output electrical of the bus switch module. The module itself is used to power the output current loop. Its output channel uses two 12-bit D/A converters for signal conversion. The analog output data has 12 bytes of output data and 2 bytes of engineering data. The supply voltage of the module is 18 to 56 volts DC, with a maximum current of 600 mA. IC660BBA025 Current-Source Output Block performs a variety of diagnostics, including output under-range and out-of-range diagnostics, output feedback error diagnostics, and CPU/ internal fault reporting. It reports all of the above errors to the handheld display so that the user can take the necessary steps to resolve these errors. It also detects hardware failures and wiring errors in the output circuit and the current level of the circuit to report output feedback errors. If the module is reporting a nuisance diagnosis due to lack of time, be sure to increase the feedback time. For input bus switchgear and field wiring, users can use terminals 5 to 32 of the module. The bus switch module has no polarity. The device's normal state LED blinks to inform the user that an error is being diagnosed. IC660BBA025 Current-Source Output Block cannot be configured as controller redundancy or standby redundancy.
