Technical specifications for IC660BLM507
Brand GE Fanuc
Series Genius I-O
Part number IC660BLM507
Component Type Genius Block pulling tool
Compatible with Genius module of the device
Materials Plastic and metal
Type of operation machinery
Quantity per package 1 drawing tool
At least 1-1/2 inches (3.84 cm) of space should be left between the required space blocks, with at least 3 inches (7.62 cm) of space above and below each block.
Configuration not required
GE Fanuc IC660BLM507 Genius Block Puller is designed for handling and adjusting solid state electronic printed circuit boards (PCBS), a delicate operation that should always take all necessary precautions, To avoid electrostatic discharge (ESD) that may damage the PCB or cause serious injury to the user of the processing board. GE Fanuc designed this special drawing tool specifically for its Genius I/O Block module. This pull-out tool is not only designed to mitigate the possibility and danger of ESD, but also allows the operator or maintenance technician to insert or remove the module in a seamless manner without causing any damage to the connector pins.
Inserting or removing different Genius I/O blocks with a mechanical Puller, such as the GE Fanuc IC660BLM507 Genius Block Puller, will result in an extended uptime of the device, which is the module insertion and removal procedure recommended by the manufacturer. GE Fanuc IC660BLM507 Genius Block Puller allows users to insert modules by simply applying the correct force without experiencing common problems, such as mistakenly inserting pins into the wrong corresponding slot. The tool is easy to store in any public area specified by the user, even within the panel that houses the Genius I/O block. No additional equipment is required to insert or remove the Genius I/O block from the PLC slot. To use this tool, the user simply unscrews 2 setting screws, puts the GE Fanuc IC660BLM507 Genius Block Puller into place, and then pushes the block into the designated slot or pulls it out.
