Technical specifications for IC660EBA025
Brand GE Fanuc
Series Genius I-O
Part number IC660EBA025
Type electronic assembly
Main device analog output block
Power supply voltage 18-56V DC
The maximum current is 600 MA
Pulsation Max 10%
Accuracy 0.15% full scale reading at 25 degrees Celsius
Resolution 6 uA
Update frequency 25 milliseconds
The diagnosis is yes.
Maximum cooling 12 watts
The IC660EBA025 electronic assembly is an electronic assembly designed to operate with an analog output block manufactured and designed by GE Fanuc Automation. This electronic component can be used with modules with voltages of 24 to 48 volts DC. This assembly includes all the electronic components required for the proper operation of the module. The assembly also includes overload protection and electronic fuses. The modules in this series can shut down the circuit within 5 microseconds of detecting a fault, which is more efficient than using a thermal fuse. The GE Fanuc Automation IC660EBA025 electronic assembly comes with 6 current source options and also comes with 2 leds to indicate the status of the device and enabled I/O. The BSM controller that comes with the output block is a 24/48-volt DC BSM, which has a block-to-block isolation rating of 1500 volts for 1 minute.
GE Fanuc Automation IC660EBA025 electronic components operate at 18 to 56 volts DC supply voltages, with a maximum current of 600 mA and a maximum ripple of 10%. The output signal characteristics of the GE Fanuc Automation IC660EBA025 electronic assembly include an accuracy class of 0.15% at a temperature of 25 degrees Celsius and an update frequency of 25 milliseconds. The module also comes with diagnostic tools to check for underranges, overranges, and feedback errors. The assembly operates in a temperature range of 0 to 60 degrees Celsius, with a relative humidity of 5 to 95 percent and no condensation. These temperature and humidity conditions need to be met, otherwise consistent block operation cannot be guaranteed.
