Technical specifications for IC660EBA026
Brand GE Fanuc
Series Genius I-O
Part number IC660EBA026
Type electronic assembly
Main device analog output block
Power supply voltage 18-56V DC
The maximum current is 600 MA
Pulsation Max 10%
Accuracy 0.15% full scale reading at 25 A °C
Resolution 6 uA
Update frequency 25 milliseconds
The diagnosis is yes.
Maximum cooling 12 watts
The IC660EBA026 input module is a current source input module with an electronic component assembly. The input module was designed and manufactured by GE Fanuc Automation. The electronic component assembly of the input module includes all components necessary for the proper operation of the module, including all electronic components and other components that contribute to signal transmission. This input block has a height of approximately 22.44 cm, a width of 8.89 cm, and a depth of 10 cm along it. It weighs 1.8 kilograms. The GE Fanuc Automation IC660EBA026 current source input block with electronic component assembly has a maximum heat dissipation rating of 12 watts, and it includes eight switches, one of which can perform BSM control.
The GE Fanuc Automation IC660EBA026 current source input module with electronic component assembly has an interblock isolation rating of 1500 volts for 1 minute and an intergroup isolation rating of 1500 volts for RMS. The electronic assembly supports a current source input module voltage of approximately 24 to 48 volts DC. It supports a supply voltage of 18 to 56 volts DC and a maximum current of 700 mA. The GE Fanuc Automation IC660EBA026 Current source input block has an input impedance rating of 100 ohms, an open circuit voltage rating of 24 volts DC, and a short circuit current rating of less than 75 mA. The thermal drift of this component starts at 25 degrees Celsius, and to function properly, it needs to be connected to the terminal assembly so that all terminal assembly are intact.
