Technical specifications for IC660EBA027
Brand GE Fanuc
Series Genius I-O
Part number IC660EBA027
Type electronic assembly
Main device analog output block
Power supply voltage 18-56V DC
The maximum current is 600 MA
Pulsation Max 10%
Accuracy 0.15% full scale reading at 25 A °C
Resolution 6 uA
Update frequency 25 milliseconds
The diagnosis is yes.
Maximum cooling 12 watts
The IC660EBA027 Input block Electronic component assembly is an I/O block assembly intended for use with the terminal assembly to become an I/O block of GE Fanuc Automation's Genius I/O series. These input blocks are primarily used as Bridges in the PLC and connect the controller to different devices via signals from 4 to 20 mA. This particular electronic component comes with all the circuits, wiring, and components needed to run the entire I/O block. In terms of its construction, the GE Fanuc Automation IC660EBA027 input block electronic component assembly weighs 1.8 kg and includes 2 different LED indicators. These leds display the current state of the device and the status of the input. The electronic components also provide module isolation.
GE Fanuc Automation IC660EBA027 Input block electronic component assemblies are rated for heat dissipation of 12 watts, inter-group isolation ratings of 1500V RMS, and nominal block power of 115 to 125 volts DC and 4 to 24 volts DC. The block electronic assembly has an input resolution of 1 uA and an input conversion time of 16.6 milliseconds to 400 milliseconds. GE Fanuc Automation IC660EBA027 Input block electronic components have a thermal drift of 70 PPM per degree Celsius and an input impedance of 100 ohms +/- 5%. The electronic component assembly can operate at temperatures of 0 to 60 degrees Celsius and vibrations of 5 to 10 Hertz. By using a frequency of 47 to 63 Hertz and a maximum of 10 percent ripple, the block can work properly.
