Technical specifications for IC660EBA100
Brand GE Fanuc
Series Genius I-O
Part number IC660EBA100
Type electronic assembly
The main device simulates I/O blocks
Power supply voltage 98-132V AC
Maximum power 10 volt-ampere
Frequency 47-63 Hertz
Accuracy 0.2% full scale reading ar 25 A °C
Resolution 12 bit plus sign
Update frequency 4 milliseconds
The diagnosis is yes.
Heat dissipation 6 watts
The GE IC660EBA100 Electronic component assembly is an electronic component assembly that operates with a specific GE analog I/O block. Both devices are designed and distributed by GE Fanuc Automation. This particular electronic component operates at a nominal block rating of 115 volts AC, with an operating voltage range of 98 to 132 volts AC. The module has a maximum rated power of 10 VA. It is worth mentioning that the GE Fanuc Automation IC660EBA100 electronic assembly provides all the electronic parts required for an I/O block to run in any compatible application. When this electronic component is used, it will require a terminal component kit that contains all the connections and ports it needs to function.
GE Fanuc Automation IC660EBA100 Electronics Components support modules with 4 input circuits and 2 output circuits. The module comes with 2 leds to provide status updates of the device and the status of the I/O connection. The entire block has a block-to-block isolation rating of 1500 volts and a heat dissipation rating of 6 watts. It is important to install the GE Fanuc Automation IC660EBA100 electronic assembly in a clean area free of any hazardous materials and free from the presence of any hazardous materials. The temperature of the environment should not exceed the range of 0 to 60 degrees Celsius, and the relative humidity level should be between 5% and 95%. The thermal drift of the module is 10 PPM per degree Celsius (typical value). The maximum thermal drift is 40 PPM per degree Celsius. The module has an output resolution of 12 bit plus signs and an output update frequency of 4 milliseconds. The output load of this module is 2000 ohms or higher.
