Technical specifications for IC660EBA103
Brand GE Fanuc
Series Genius I-O
Manufacturer Emerson Automation/GE Fanuc (ever)
Manufacturer GE Fanuc/Emerson Automation
Part number IC660EBA103
Series Genius I/O
Series block I/O
Type electronic assembly
Part number IC660EBA103
Compatible module IC660BBA103 6-channel thermocouple module Input module
Input 6 thermocouple compatible inputs, divided into three groups of 2 each.
Product description Electronic assembly
Nominal operating voltage 115 VAC, / 125 VDC nominal value; 125 volts direct current
Power supply voltage AC 93-132V AC
Compatible block I/O IC660BBA103 115 VAC / 125 VDC 6-channel thermocouple input block
Power supply voltage range 93-132 VAC, 47-63 Hz; 105-145 VDC, 10% ripple
Power supply voltage DC 105-145V DC
Compatible terminal base IC660TBA103
Group to group isolation 300V Valid value
The IC660EBA103 is a modular component of the Genius I/O thermocouple module input module. The assembly is an electronic assembly for use with the IC660TBA103 terminal base, which includes the IC660BBA103 thermocouple input and output modules. This molded I/O module is compatible with thermocouples and voltage generating instruments and accepts an input voltage range of -25 to +150 mV with a measurement accuracy of 8 Hz at 25 degrees Celsius. Genius Block I/O was formerly owned by GE Fanuc Automation and is now owned by Emerson Automation. These are modular I/O platforms that are primarily used to implement distributed I/O architectures. The series features a modular design that allows components to be replaced and serviced one by one. This feature simplifies module maintenance and effectively reduces downtime, as existing wires can be maintained and components are easy to install. The electronic circuits provided by the IC660EBA103 are analog-to-digital converters (ADC), module-to-backplane isolation, and channel group isolation circuits, rated at 1500 VAC per minute and 300 V. It also has a multiplexer circuit that intersperses two main thermocouple input times and input filters. The electronic assembly is designed for supply voltage ranges of 93-123 VAC, 47-63 Hz, 9 W power, nominal voltage of 115 VAC or 105-145 VDC, ripple of 10% at 9 W power, nominal voltage of 125 VDC. The operating temperature of the module is 0 ° C to 60 ° C; The storage temperature is -40 ° C to 100 ° C; Relative humidity 5-95%, no condensation and operating vibration 5-10 Hz, 2 inch or 5.088 displacement.
The IC660EBA103 is an electronic component assembly that is part of GE Fanuc Automation's Genius I/O series of thermocouple blocks. This assembly provides the electronics for the correct operation of 6 thermocouple compatible inputs divided into 3 groups. This type of module is mainly used to monitor temperature input and measure low-level input signals. Each of the 3 input groups is isolated, and they all contain 2 thermocouple input circuits and 2 compensation inputs, which are remote cold end input types. GE Fanuc Automation IC660EBA103 Electronic components components can perform different diagnostics. These diagnostics include internal fault detection, open-circuit detection, and high-low input alarm diagnosis. GE Fanuc Automation IC660EBA103 Electronics components are highly compatible with PCI and QBIM modules. For these connections, version 3.5 or higher of the handheld display software is required. The modules are also compatible with GE series 90-70 PLCS, Series 6 PLCS, and Series 5 PLCS. For these PLCS, the CPU must be version 2 or later, version 105 or later, and version 3.0 or later, respectively. The module has a maximum heat dissipation rating of 9 watts, and the isolation voltage between modules is 1500 volts/min.
