Technical specifications for IC660EBA104
Brand GE Fanuc
Series Genius I-O
Manufacturer GE Fanuc/Emerson Automation
Part number IC660EBA104
Series block I/O
Type electronic assembly
Part number IC660EBA104
Main device analog output block
Product description Electronic assembly
Supply voltage 93-132V AC and 105-145V DC
Compatible module IC660BBA104 Four (4) input and two (2) output combined analog I/O modules
Maximum current 250 mA (AC) and 140 mA (DC)
Compatible terminal base IC660TBA104
Frequency 47-63 Hertz
Nominal operating voltage 115 VAC, / 125 VDC nominal value; 125 volts direct current
Pulsation Max 10%
Power supply voltage range 93-132 VAC, 47-63 Hz; 105-145 VDC, 10% ripple
Accuracy 0.1% full scale reading at 25 A °C
The IC660EBA104 is an electronics assembly module that is part of the Genius I/O combined input and output module, specifically four (4) 0-20 mA / 4-20 mA and two (2) 0-20 mA / 4-20 mA current signals. The Genius I/O family, formerly from GE Fanuc Automation and now part of Emerson Automation, is a modular distributed I/O component designed to implement cost-effective and efficient I/O integration solutions. Because important modular components in the series can be separated and replaced separately, troubleshooting and maintenance are easy to perform, especially in applications that require high availability or less downtime. As an electronic assembly component, the module hosts converters, isolators, multiplexers, input filters, and diagnostic circuits. A converter circuit is essentially an analog-to-digital converter (ADC) for input and a digital-to-analog converter (DAC) for output. The received analog signal is converted to a high-resolution digital format, while the signal to be generated is returned as an analog value and fed to the terminal base. The isolator circuit provides block-to-block isolation rated at 1500 V for 1 minute, and group to group isolation rated at 300 V, continuous. The input filter is used to modulate the received signal, eliminating noise and fluctuations, while the diagnostic circuit provides underrange, overrange, and feedback error sensing. The IC660EBA104 has the same operating, storage temperature and relative humidity requirements as the other components, specifically, the operating temperature is 0 ° C to 60 ° C, the storage temperature is -40 ° C to 100 ° C, and the relative humidity is 5-95% non-condensing.
The IC660EBA104 I/O block is a current source analog I/O block electronic assembly designed by GE Fanuc Automation in the GE Genius I/O family. The part consists only of the electronic component assembly of the module, which is connected to the terminal assembly to form a complete I/O module. The electronic assembly includes all internal components required to provide the main functions of the module. This module is used to provide isolated power to different circuits in the system. Some of the features offered by GE Fanuc Automation IC660EBA104 I/O block electronics components include input alarm detection, output feedback checking, and CPU redundancy. It can also perform diagnostic activities, including input open circuit detection, output overrange and underrange, and output feedback error diagnosis. GE Fanuc Automation IC660EBA104 Current Source Analog input/Output module Electronic component assemblies are compatible with all bus controllers, PCIM devices and QBIM devices in the GE Genius I/O family. It is also compatible with the 6 Series and 5 GE PLCS as long as certain requirements are met. I/O blocks and electronic component assemblies are only compatible with bus switch modules rated for 24 to 48 V DC. GE Fanuc Automation IC660EBA104 I/O block electronic component assemblies operate with AC power rated at 92 to 132 volts AC, frequency 47 to 63 Hertz and DC power rated at 105 to 145 volts DC. The maximum ripple is 10%. The maximum rated current for AC and DC voltages is 150 mA and 140 mA respectively. This electronic component has a thermal drift of 70 PPM per degree Celsius.
