Technical specifications for IC660EBD020
Brand GE Fanuc
Series Genius I-O
Manufacturer GE Fanuc/Emerson Automation
Part number IC660EBD020
Series block I/O
Type electronic assembly
Part number IC660EBD020
Main device analog output block
Product description Electronic assembly
Power supply voltage 18-56V DC
Compatible module IC660BBA024 Four (4) inputs and two (2) outputs combined analog I/O modules
Pulsation Max 10%
Compatible terminal base IC660TSD020
The maximum DC power supply required is 150 mA and 300 mA
The IC660EBD020 is an electronic component assembly used with the IC660TSD020 terminal base to form Genius I/O 16-channel, 24/48 VDC discrete input and output I/O modules. These components were previously manufactured by GE Fanuc Automation and are now part of Emerson Automation. The IC660EBD020 contains an electronic circuit for processing the field voltage signal that is forwarded to the module channel. The electronic assembly consists of an RC buffer circuit, a smart switch, and a light emitting diode (LED) for indicating the status of the channel. It also provides connectivity to the backplane, where power is supplied and data is exchanged with partner controllers. The IC660EBD020 provides sixteen (16) discrete input channels designed to enter the on-state at a processing speed of 1.7 ms plus configured signal delay over the input voltage signal range of 16-24 VDC. Instead, the output channel is capable of producing 2 amps per circuit, with a maximum surge current of 10 amps and a duration of 10 milliseconds. The I/O block produces a total output current of 15 amps at 35 degrees Celsius, while the maximum switching frequency is once per second. Available input diagnostics include open circuit, overheat, and switch fault detection, while output diagnostics include short circuit, overload, no-load, switch fault, and overheat. The operating temperature of the electronic components is required to be 0 to 60 degrees Celsius, the storage temperature is -40 to 100 degrees Celsius, the relative humidity is 5-95%, and there is no condensation. The IC660EBD020 operates at 5-10 Hz with acceptable displacements up to 2 inches or 5.088.
The IC660EBD020 is an electronic component component of the IC660BBD022 circuit source I/O module. Both parts were designed by GE Fanuc Automation and are included in the Genius family of GE I/O modules. This particular model consists of 16 discrete inputs and outputs. The module can be used with 2 different types of sensors, such as 3-wire solid-state sensors and electromechanical sensors. The module can provide and receive current from these specific output devices. GE Fanuc Automation IC660EBD020 Electronic Components Components include all circuits and electronic components of the module. The circuits present in the module can be configured as inputs, three-state inputs, or outputs, depending on the requirements of the application at hand. GE Fanuc Automation IC660EBD020 Electronic components assembly with configurable features to help improve I/O block operation. For example, it provides output pulse testing capabilities and optional input filtering times. Other features include CPU redundancy and the ability to maintain the last state of the output. The input processing time for this module is 5600 ohms. GE Fanuc Automation IC660EBD020 electronics components are compatible with Genius Bus controllers, PCIM and QBIM modules, and Genius handheld displays. It operates in a voltage range of 18 to 56 volts DC with a maximum ripple of 10%. The DC power required for this module is 150 mA (typical value) and 300 MA (maximum value). It can be used in an environment with a maximum temperature of 60 degrees Celsius. The block has a heat dissipation rating of 68.8 watts and isolation between blocks is 1500 volts.
