Technical specifications for IC660EBD021
GE Intelligent Platforms/GE Fanuc Automation
Series Genius I-O
Manufacturer GE Fanuc/Emerson Automation
Part number IC660EBD021
Series block I/O
Part number IC660EBD021
Product description Electronic assembly
Product Type Electronic Assembly
Compatible module IC660BBD021, 24/48 VDC 16-channel combined discrete input and output blocks; IC660BBD023,24 VDC 16 channel combined discrete input and output modules.
Operating voltage 18 to 56V DC /18 to 30V DC
Compatible terminal base IC660TSD021 or IC660TSD023 terminal base
Pulsation 10%
Nominal input voltage 24V DC / 48V DC
Required DC power 300 mA (Max)
Input voltage range 18-56 volts DC
Nooooo. Configurable discrete inputs sixteen (16)
Block to block isolation 1500 volts
Nooooo. Configurable discrete outputs sixteen (16)
Circuit LED separate load side indicator
The IC660EBD021 is part of the Genius I/O Block series, which was previously manufactured by GE Fanuc Automation and is now part of Emerson Automation. This electronic component assembly is specially used with the terminal base IC660TSD020 or IC660TSD023 to form a functional block I/O module, such as IC660BBD021, 24/48 VDC 16-channel combined discrete input and output, And IC660BBD023, 24 VDC 16-channel combined discrete input and output blocks. The IC660EBD021 hosts sixteen (16) perfusion/pull I/O circuits designed to receive 24/48 input voltages. Both the input and output circuits are equipped with status LED indicators that light up when a particular channel becomes active. This electronic circuit is also responsible for communicating with the processor through the backplane and power terminals to receive 5 VD backplane power. The IC660EBD021 is ideal for use as a spare part for functional IC660BBD021 and IC660BBD023 I/O blocks. When replacing electronic components, the module power supply must be disconnected to eliminate the possibility of arcing that could damage nearby electronic components. Also, never touch electronic parts and hold them close to grounded objects for a period of time to release static electricity. When working on site, place the module in an ESD bag or on the top of the ground console. This electronic component also hosts the communication interface, which the module uses to exchange data with devices within the network, such as a central programmable logic controller (PLC). It supports the Genius I/O protocol, which is a multi-point, ling distance, and high-speed communication protocol.
The IC660EBD021 I/O block is a 16-circuit DC I/O block manufactured by GE Intelligent Platforms/GE Fanuc as part of the GE Genius I/O family. The module is a smart, configurable module that can be used to connect with a variety of discrete DC actuators and sensors. It also includes 2 DC powered 16-circuit power supplies to provide current to the field output device. IC660EBD021 16 Circuit The feed current or source I/O module has 16 isolation circuits that can be configured as output, input, or tri-state inputs. The output circuit can be connected to the input circuit without the use of any other components or logical state reversal. The device has configurable features such as an output pulse test function, output power defaults, and optional input filtering times of 10 to 100 microseconds. It also has an output hold last state or default configuration feature. The GE Fanuc IC660EBD021 I/O block has a diagnostic function that identifies installation triggers and runtime errors. The diagnostic functions of the module include fault switch detection, overheat protection, overload detection and shutdown, no-load detection and three-state input open circuit detection. The GE Fanuc IC660EBD021 I/O block weighs about 4 pounds or 1.8 kilograms, has a heat dissipation rating of 68.8 watts, and all 16 outputs are powered with 2 amps of current. The current required for a DC power supply is 150 mA (typical) and 200 MA (maximum). Power drop time is 10 microseconds. When in the on-state, the rated voltage is 24 volts DC supply voltage, the source block voltage range is 16 to 24 volts DC, and the perfusion block voltage range is 0 to 8 volts DC.
