Technical specifications for IC660EBD024
Brand GE Intelligent Platform /GE Fanuc
Series Genius I-O
Part number IC660EBD024
Product line Genius I/O
Block to block isolation 850 volts
Weight 4 lb (1.8 kg)
Minimum heat dissipation 11 watts with 8 inputs
Maximum heat dissipation 18 watts, 32 outputs
Single source operating voltage 10 to 30 V DC
Operating temperature 0 to 60 degrees Celsius
Storage temperature -40 to 100 degrees Celsius
Non-condensing humidity 5% to 95%
Maximum output current 0.5 A per circuit
Output diagnostic switch fault
Required DC power 150 mA (typical)
The maximum DC power required is 300 mA
IC660EBD024 DC 32 circuit discrete I/O electronic assembly, manufactured by GE Intelligent Platforms/GE Fanuc as part of the Genius I/O family. The machine has 32 circuits, which are isolated inputs and outputs. It weighs about 1.8 kilograms or 4 pounds, has 850 volts of block-to-block isolation, a minimum heat dissipation of 11 watts for 8 inputs and 18 watts for 18 outputs, and a current rating of 5 amps. It has a single-source operating voltage range of 10 to 30 volts DC (using 12/24 volts DC power supply) or 4.9 to 5.3 volts DC (using 5 volts DC power supply) and is suitable for drain type only. The DC supply current required for this module is 150 mA (typical value) and 300 MA (maximum value). Additional output specifications for the GE Fanuc IC660EBD024 electronic assembly include a maximum steady state output current of 0.5 amps per circuit, a total block output current of 16 amps, a maximum output opening delay of 0.5 microseconds, and a switch fault output diagnosis.
GE Fanuc IC660EBD024 Electronic components components operate in an ambient temperature range of 0 to 60 degrees Celsius, storage temperature range of -40 to 100 degrees Celsius, and non-condensing relative humidity tolerance range of 5 to 95 percent. Each of the 32 identical input and output circuits of the electronic assembly can be configured as input or output. When a module is set up as a combination module, output feedback is provided in the corresponding input reference. 32 Circuit DC power input and output modules have all output devices connected to the negative terminal of the power supply. The input controls the positive power side, while for the output, the on-state condition is logical 1 and the off state condition is logical 0.
