Technical specifications for IC660EBD025
GE Intelligent Platforms/GE Fanuc Automation
Series Genius I-O
Part number IC660EBD025A
Product line Genius I/O
Product Type Electronic Assembly
Circuit 2, 32 loop
Block to block isolation 850 volts
Operating voltage 4.9 to 5.3 V DC, 5 V DC power supply
Maximum output current (steady state) 0.5 amp
Maximum surge current 4 amps, maximum 10 microseconds
Module output current 16 amps
Maximum output turn-on delay of 0.5 microseconds
Operating temperature 0 to 60 degrees Celsius
Output diagnostic switch fault
Storage temperature -40 to 100 degrees Celsius
Non-condensing humidity 5% to 95%
The GE Fanuc IC660EBD025 Electronic Component Assembly is an electronic component assembly manufactured by GE Fanuc as part of the Genius I/O family. The electronic assembly has two 32-circuit DC blocks, consisting of 32 circuits rated at 12/24 volts DC on the source block for providing current to the field output device, and 32 circuits rated at 5, 12, or 24 volts DC on the feed current block that receives current from the field output device. Both IC660EBD025 electronic component assemblies operate at nominal rated voltages of 12 to 24 volts DC, and the fill current version is compatible with 5-volt TTL. The 32 circuit DC input and output modules can be connected to various input devices, such as 2-wire and 3-wire electronic proximity switches. The output provides low-power control and indication devices such as contactors, lights, and relays with power supplies. The circuits of the IC660EBD025 Electronics components can either be configured for output or inputs.
When using the GE Fanuc IC660EBD025 electronic component assembly, the output circuit can be connected directly to the input circuit without the use of logical state reversal or other components. This flexibility provides efficiency for industrial applications. When each circuit is used as an output, they come with built-in protection to protect the device while achieving short-time surges. It also prevents short-circuit loads caused by wiring errors. It also has a block LED that shows correct block operation as well as CPU communication. GE Fanuc IC660EBD025 Fault reporting of electronic components components can be disabled or enabled circuit by circuit. Other configurable features of the module include output power, power-on default Settings, CPU redundancy type, and bus switching module control.
