Technical specifications for IC660EBD100
Brand GE Intelligent Platform /GE Fanuc
Series Genius I-O
Part number IC660EBD100A
Product line Genius I/O
Product Type Electronic Assembly
Weight 1.8 kg (4 lb)
Size 8.83x3.50x3.94 inches
Standby power 8.5 watts
Operating voltage 93 to 132 V AC
Frequency 47 to 63 Hz
Power supply voltage drop time 1 cycle (16.7 ms at 60 Hz or 20 ms at 50 Hz)
Block to block isolation 1500 volts
Heat dissipation 16 W, 8 inputs
Cooling 43.5 W, 8 outputs, 2 amps
Operating temperature 0 to 60 degrees Celsius
Storage temperature -40 to 100 degrees Celsius
The IC660EBD100 Electronic Component Assembly is an electronic component assembly manufactured by GE Intelligent Platforms/GE Fanuc as part of the Genius I/O product line. The electronic assembly has a single-source operating voltage of 93 to 132 volts AC and a standby power rating of 8.5 watts with all I/O off. The IC660EBD100 electronic component assembly has a block-to-block isolation rating of 1500 volts, a maximum heat dissipation of 16 watts, with 8 inputs and one 43.5 watts, with 8 outputs, and a current of 2 amps. Other specifications for the block include a weight of about 4 pounds or 1.8 kilograms and a size of 8.83 x 3.50 x 3.94 inches. It also provides an LED for each I/O point with a frequency of 47 to 63 Hertz. The minimum voltage at both ends of the input device is 60 volts RMS, and the module has a minimum leak rating of 1.5 MA through the input device.
The GE Fanuc IC660EBD100 Electronic Component assembly is an 8-circuit input and output block with 8 similar circuits rated to operate at 115 volts AC. As mentioned earlier, it also has circuit leds on each circuit that can indicate different things. When the circuit is configured as an input, the circuit LED indicates the threshold voltage present on the input terminal. When the circuit is configured as output, the LED of the circuit displays the status of the CPU command. The IC660EBD100 electronic component assembly can be configured as an input and output module, an output module only, or an input module only. The electronic assembly module transmits 1 byte of data per bus scan and allows 1 byte of data per bus scan.
