Technical specifications of the IC660EPM100
Brand GE Fanuc
Series Genius I-O
Manufacturer Emerson Automation/GE Fanuc (ever)
Manufacturer GE Fanuc (ex); Emerson Automation (Current) Emerson Automation (current)
Part number IC660EPM100
Series Genius I/O modules
Part number IC660EPM100
Product Description Power TRAC Block electronic components
Product description Electronic assembly
Product Description Genius PowerTrac Electronic components
Rated voltage 115/230 volts AC
Compatible block I/O IC660BPM100 PowerTRAC module
Compatible I/O modules Module IC660BPM100 PowerTrac I/O block
Compatible block IC660BPM100
LED indicator unit OK; I/O has been enabled
Communication Genius I/O
Operating temperature 0 to +60 degrees Celsius (+32F to +140 degrees Fahrenheit)
Communication interface Handheld monitor interface
The IC660EPM100 is an electronic component assembly that is part of the PowerTrac I/O Block module. This electronic component is a compatible replacement for an existing electronic component of the same I/O block, making it easy to replace a failing module without interrupting an existing I/O connection. The electronic assembly carries the module's power circuit, signal conditioning, isolation and protection circuit. The electronic component provides the power metering functions of the module, such as individual phase measurement of voltage, reactive power and current, including neutral lines of current; Reactive power; Effective system power factor; Total system KWH; System frequency; Low, Normal, and High block ambient temperature status. Total harmonic power content per phase. The module's input circuit is designed to accommodate nominal voltages of 115 VAC/230VAC, voltage ranges of 90-265VAC, and frequencies of 47-63 Hz; 125 VDC Nominal voltage, voltage range is 100-150VDC, maximum 35VA. The electronic component assembly is secured to the terminal base for proper installation. The electronic assembly is aligned with the terminal base using shoulder screws as guides. Gently push down the electronic component assembly to connect the module. If you feel resistance, do not force the electronic component assembly, make sure to realign the terminal base, and check the socket and connector pins. After connecting the electronics, secure the device to the terminal base to form a single PowerTrac block. Electronic components Components are essentially the units that communicate with the CPU. The compatible CPU is IC697CPU731G or later. IC697CPU771E or later; All versions of IC697CPUxxx; IC600 Series PLC CPU: rev.105 or later; IC600 PLUS series PLC CPU version 110 or higher; IC655 Series PLC CPU rev.4.0 or later.
The GE Fanuc IC660EPM100 Electronics Assembly belongs to the Genius I/O series of power TRAC modules. It accepts 115 to 230 volts AC input power. It is compatible with the GE IC660BPM100 Genius Power Track Block for a variety of power monitoring applications. The electronic component is a microprocessor-based intelligent component in the power module system that performs arithmetic and logic operations to store and process input wave signals. The IC660EPM100 Electronics component can be easily inserted and installed in the module without interfering with the field wiring of the module. The Genius I/O handheld display can be used to configure this electronic assembly module. When installing an I/O block, it is recommended that you install it with the electronic component assembly removed, or install the block first and then install the component onto the block. The IC660EPM100 Electronics Assembly has the main electronic circuit in the module responsible for communication. It can use the voltage and current input of the transformer. The configuration package can be used with a handheld monitor to configure modules and their components. It also has a 125 volt DC rating and a 5 amp current rating. The standard data rate of the component is 153.6 Kb, and the expansion rate is also 153.6 Kb. It establishes a handshake protocol for communication by sending 16 bits of status data and 36 bytes of calculation data. The IC660EPM100 Electronics Assembly also provides overcurrent transient detection by storing 128 sample values for each input. Its design ensures easy installation and configuration. For accurate assembly installation, use shoulder screws on the side of the terminal assembly to align the assembly, then push the electronic assembly firmly and quickly into the slot of the power TRAC block.
