Technical specifications for IC660TBA024
Brand GE Fanuc
Series Genius I-O
Part number IC660TBA024
Describes an I/O block
Voltage 24/48 V DC
Cooling 12 watts
Block to block isolation 1500 volts
Group to group isolation 300 V valid value
Maximum rated current 600 MA
Pulsation maximum 10%
Temperature 0-60 degrees Celsius
The IC660TBA024 block is an I/O module using a current power supply manufactured by GE Fanuc. The analog I/O block is a terminal only assembly with a rated voltage of 24/48 volts DC. The main function of the module is to supply power to the circuit. The circuit on the module supports values that can be scaled linearly. The analog I/O module is an industrial automation device equipped with different configurable functions, including alarm detection, output hold and optional input conversion. The IC660TBA024 I/O module is also advanced in diagnostics and can easily sense open circuit, high/low alarms, underrange, overrange and feedback errors.
The IC660TBA024 I/O block has a maximum heat dissipation of 12 watts during a conventional cycle. Module to module and group to group isolation for 1500 volts (1 minute) and 300 volts RMS. The supply voltage should be between 18 and 56 volts DC, with a maximum rated current of 600 mA. At 24/48 volts DC, the module has a maximum ripple of 10% and a power voltage drop time of 10 milliseconds. The module has an open architecture. The ambient temperature should not exceed 60 degrees Celsius. The IC660TBA024 I/O module comes with alarm thresholds that can be configured for specific inputs. When a specific limit is reached, a message can be sent to the operator. The module can also detect wiring errors and faults in the hardware. For underrange and OVERRANGE errors, it can send an "overrange" message if the signal exceeds 25 mA.
