Technical specifications for IC660TBA101
Brand GE Fanuc
Series Genius I-O
Part number IC660TBA101
Description Terminal assembly
Voltage 115 V AC /125 V DC, 24/48 V DC
Group to group 300 volts
Temperature 0-60 degrees Celsius
Power drop time 115 volts AC
Cooling 7 watts
Block update time is 400/800/1600 ms
Input circuit 6
The IC660TBA101 is a terminal component for GE IC660BBA101, IC660T, IC660TB, and IC660TBA devices. It is designed and manufactured by GE Fanuc and is part of the RTD module. These RTD modules are equipped with 6 input circuits, divided into 3 groups. The isolation voltage between these groups is 300 volts. The module is rated for 115 volts AC /125 volts DC or 24/48 volts DC. The input information is linearized with respect to the selected RTD. The IC660TBA101 terminal assembly has different configurable options, including input filter time, RTD resistance, alarm threshold, and linearization Settings. The module is pre-calibrated and no calibration is required during installation. The operating temperature should be set between 0 and 60 degrees Celsius, and the maximum non-condensing humidity is 95%. Blocks should be kept away from electromagnetic noise and contaminants.
The GE Fanuc IC660TBA101 terminal assembly is advanced in its functionality. It comes with an automatic diagnostic function to easily detect operational and installation errors. It can easily perform input short circuit detection, fault detection, open circuit detection, low and high alarms, and over - and under-range input detection functions. The power drop time for 115 volts AC is 1 cycle, while the power drop time for 125 volts DC is 10 milliseconds. The Genius I-O RTD module dissipates 7 watts of heat under conventional load. The IC660TBA101 terminal assembly can be connected to a programming controller or handheld monitor using the monitoring port in the upper right corner of the module. Data blocks are updated at 400, 800, or 1600 milliseconds.
