Technical specifications for IC660TBA106
Brand GE Fanuc
Series Genius I-O
Part number IC660TBA106
Block type 6 analog input circuits
Rated voltage 115 V AC / 125 V DC
Supply voltage 93 to 132 volts AC / 105 to 145 volts DC
Maximum current 250 mA (AC) / 140 MA (DC)
Frequency/Ripple 47 to 63 Hz / 10% Max ripple
Power supply voltage drop time 1 cycle (AC) / 10 ms (DC)
Heat dissipation (Max.) 12 watts
Block to block isolation 1500 volts for 1 minute
Group to group isolation 1500 volt RMS
Dimensions (H x W x D) 224 x 88 x 100 mm (8.8 x 3.5 x 3.9 in)
Weight 1.8 kg (4 lb)
Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Storage temperature -40 to 100 degrees Celsius (-40 to 212 degrees Fahrenheit)
The Genius I/O terminal assembly for the IC660TBA106 terminal Assembly is a component with 6 analog inputs. This component is part of the terminal block designed to allow and enhance communication between the controller and various field devices. Analog signals sent between these components are emitted in the current range of 4 mah to 20 mah. The IC660TBA106 current source terminal assembly is manufactured by GE Fanuc and features circuit scaling, input conversion time, adjustable input alarm, and CPU redundancy. The terminal is compatible with GE series 90-70 PLC equipment and supports a wide range of programming software, offering a full range of customizable options. In order to configure the terminal, the user must use a dedicated handheld display.
The GE Fanuc IC660TBA106 terminal assembly has input conversion times from 16.6 to 400 ms, and overrange capacities from 0 to 25 mA. The terminal requires a power supply with a voltage range of 93 to 132 volts AC or 105 to 145 volts DC. The usual isolation for block-to-block relationships is 1500 volts, and the isolation between groups is 1500 volts RMS. The differential pressure time of the IC660TBA106 terminal assembly for AC voltage is one cycle, and the minimum differential pressure time for DC voltage is 10 ms. The component is rated at 250 MA for AC power and 140 mA for DC power. In addition to this, the terminal assembly has a rejection value of -45 dB at frequencies of 50 to 60 Hz and an input impedance of 100 ohms during normal operation.
