Technical specifications for IC693ACC350
Brand GE Fanuc
Series Series 90-30
Part number IC693ACC350
RAM backup battery support
Serial port connector support
Product Type Redundant power adapter module
Compatible component programmable controller
Mounting DIN rail
System storage temperature -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
GE Fanuc's IC693ACC350 adapter module is a redundant power adapter module. This redundant power supply (RPS) adapter replaces the power supply on the expansion base or CPU base and then connects them to the redundant power base. The IC693ACC350 redundant power adapter is installed in the left slot on the mainboard of the IC693 device like a regular IC693 power supply. This RPS adapter has many physical features, including module LED status indicators, serial port connectors, and RAM with spare batteries. These features are the same as those found in standard programmable logic controller (PLC) power supplies. Backup batteries and serial port connectors do not work on any power supply installed on the RPS baseboard. The only LED on this RPS adapter is the "PWR" LED.
The connector of the GE Fanuc IC693ACC350 RPS adapter is connected to the connector on the base plate of the RPS power output cable. This cable is divided into 2 connectors at the end of the IC693ACC350 adapter. In addition, the IC693ACC350 RPS adapter comes with a short ground wire that allows the user to ground the adapter during installation. To configure the IC693ACC350 RPS adapter, users need VersaPro 2.00 software or later. During the configuration, you need to select the IC693ACC350 RPS adapter module for the power supply of the slot, and then fill in the configuration information of the IC693ACC350 module. In addition, the PLC's RAM backup battery should be installed on the IC693ACC350 RPS adapter.
