Technical specifications for IC693ALG222
Range -10 to +10 V, 0 to 10 V
Part number IC693ALG222
Series Series 90-30
Brand GE Fanuc
Isolate the 1500 volt RMS field to the logical side
Input types Unipolar and bipolar
LED 2 green leds (" Module OK "and" Power Supply OK ")
Product life cycle status * Discontinued/obsolete
Product Description Analog voltage input
2.5mV resolution from 0V to +10V (1 LSB = 2.5mV)
Resolution from -10V to +10V 5 mV (1 LSB = 5 mV)
IC693ALG222 is a GE Fanuc series 90-30 PLC module. The module is an analog voltage input module designed to accept up to sixteen (16) single-ended or up to eight (8) differential voltage signals, specifically 0-10VDC (unipolar) and -10VDC - +10VDC (bipolar) signals.
The IC693ALG222 channel can be configured separately. For a single-ended configuration, the update rate per channel is 6 ms, while for a differential configuration the update rate is 3 ms. At 0-10VDC, the module has a resolution of 2.5 mV (1 LSB = 2.5 mV), while at -10VDC - +10VDC, the module has a resolution of 5 mV (1 LSB = 5 mV). Regardless of the input type and wiring method configured, the module exhibits absolute accuracy of 0.25% of ± full scale @ 25 degrees Celsius or 77 degrees Fahrenheit, 0.5% of ± full scale, and a linearity of +/- LSB over the specified operating temperature range. For a single-ended configuration, the input filter responds to 41 Hz, compared to 82 Hz when operating in differential mode. The maximum internal power consumption of the module is 112 mA for the backplane +5 VDC bus, and 41 mA for the backplane isolation +24 VDC power supply.
This module is installed in any of the available slots on the 5-slot or 12-slot baseboards. Based on Series 90-30 cpus, the number of IC693ALG222 installations is limited to 4 on systems using CPU 311, 313, or 323, 8 on systems using CPU331, and 12 on systems using CPU 340 or 341. 51 in a system using CPU 350-364. This includes remote I/O racks supported by each specified CPU.
The IC693ALG222 analog voltage input module consumes 112 mA current from the 5-volt bus on the PLC. It also requires 41 milliamps of current to power the onboard power converter, which powers the user-side circuit. The maximum number of 16-channel analog voltage input modules that can be installed in the system is 8, and the GE cpus are 331 to 351. It can be installed in any I/O slot on the PLC baseboard. The IC693ALG222 analog voltage input module has 2 green leds to indicate the status of the module and the user-supplied power supply. These are Module OK and Power Supply OK leds, which flash to inform the user of the status of the system. If the module is installed in the system, the module's configuration software provides tools to read the module and configure it into the system.
