Technical specifications for IC693ALG390
Range -10 to +10 volts
Part number IC693ALG390
Series Series 90-30
Brand GE Fanuc
Product life cycle status * Discontinued/obsolete
Product Description Analog voltage output
Offset up to 1 mV, 0 to 60°C (32°F to 140°F)
Calibration factory calibrated to 2.5 mV per count
Product Description Analog voltage output
Number of channels 2
External power supply voltage range 18 to 30 VDC
External power supply voltage ripple 10%
Isolate the 1500 volt RMS field to the logical side
IC693ALG390 is a GE series 90-30 Programmable Logic controller (PLC) module. The module is an analog output module with two (2) output channels capable of providing a voltage output signal from -10 to +10 VDC. The module is ideal for automatic and manual control of closed-loop control systems and transmission of signals to receiving and measuring instruments. It can also be used with a data logger.
The IC693ALG390 module has a resolution of 2.5 mV, where 2.5 mV is equal to 1 LSB, and an absolute accuracy of ± 5 mV with a maximum offset of 1 mv at 25° C (77° F) and 0 to 60° C (32° to 140° F). The module has an update rate of 5 ms on both channels, which is directly affected by the I/ O scan time and user program structure. The module also has built-in isolation between the field side and the logical side and is rated at 1500 VDC.
The module can also operate by providing an external voltage range of 18 to 30 VDC (nominal power supply is +24 VDC), +24 VDC from an isolated backplane or a user-supplied voltage source, and +5 VDC from the backplane with an acceptable voltage ripple of 10%. The acceptable voltage ripple is 10%.
When the CPU switches to STOP in RESET mode, this module can be configured to hold the last state value or provide 0VODC output. This configuration is set via the DEF0 jumper located on the detachable terminal. By default, the module is set to save the last state of the module.
