Technical specifications of IC693CBL328
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc (ex); Emerson Automation (Current) Emerson Automation (current)
Part number IC693CBL328
Series Series 90-30
Description Wiring terminals Connect cables
Part number IC693CBL328
Length 3 m
Description High-density I/O cable
Connector type Right-angle 24-pin D-type connector
Nooooo. Pin count 24
The cable shield is not shielded
Single wire diameter #24 US wire gauge
Rated current 1.2 amps
Cables Replace outdated straight connector cables for devices
IC693CBL328 is an input and output interface module. The cable is specifically designed for high-density I/O modules, i.e. thirty-two (32) point modules using Fujitsu 24-pin user I/O connectors. It is used with the 90-30 series Programmable Logic Controller (PLC) family, which was previously from GE Fanuc Automation and is currently offered by Emerson Automation. The 90-30 series PLCS using the aforementioned Fujitsu connectors are IC693MDL654, IC693MDL655, IC693MDL752 and IC693MDL753. One end of the IC693CBL328 connector is right-angled, while the other end of the cable is a set of peeled wires or flying wires. For direct wiring methods, IC693CBL328 pairs with IC693CBL327 This cable is 10 feet or 3 meters long and can be used for fast connections to high-density I/O modules and user-supplied I/O terminals. Whether it is a single standard terminal or a compact printed circuit board (PCB) -based terminal. The IC693CBL328 reduces the possibility of miswiring because the prefabricated cable is wired end-to-end, where pin A1 is connected to pin A1, and so on. The end connector automatically installs and easily snaps into high-density I/O connection ports. With the supplied conductor and color coding, the user can easily identify the pin connection of the peeled wire on the other end, thus simplifying wire marking. With a 3-meter cable, external I/O terminals can be placed anywhere on the housing, whether designed for top entry, bottom entry, or mounted onto adjacent I/O marshalling panels for strategic cabling implementation. For the right direction, this cable clearance requirement is compared with that of a straight cable.
The IC693CBL328 cable is a right side terminal connection cable manufactured by GE Fanuc. The cable is 3 meters or 10 feet long. It comes with two 24-pin 90-degree or right-angle connectors. It provides a reliable and secure connection between devices. The cable is primarily used with an I/O panel adapter or I/O module. The cable can be used to connect multiple GE IC693 and IC694 programmable controller high-density modules with a pair of Fujitsu 24-pin connectors for user connection. The IC693 PLC system is a 30 watt power supply designed for nominal inputs. It is mounted on the PLC baseboard. This cable replaces an older cable with a previously designed straight connector, which is now obsolete. The IC693CBL328 cable is equipped with an improved right Angle connector to meet the needs of modern PLC systems. One end of this cable has a female connector and the other end of the cable is tinned. This unshielded cable is structurally robust and very flexible. While the cable is fully compatible with all GE Fanuc IC694 series modules and most IC693 series modules, the cable should not be used with the IC693 shaft positioning module. The pair of the IC693CBL328 cable is a solid color with black tracer. Cables require greater clearance during installation than straight connectors. The IC693CBL328 cable should be kept away from heat sources and direct sunlight. EMC noise is known to degrade the performance of cables, so cables should not be exposed to such noise. This cable is an accessory that is easy to install and replace.
