Technical specifications of IC693CBL327
Manufacturer GE Fanuc
Part number IC693CBL327
Manufacturer GE Fanuc (ex); Emerson Automation (Current) Emerson Automation (current)
Series Series 90-30
Series Series 90-30
Connector depth rating 2 inches (51 mm)
Part number IC693CBL327
Compatible cable IC693CBL328 cable
Description High-density I/O cable
Compatible with PLC IC694MDL752 and IC694MDL753
Nooooo. Pin count 24
Objective To connect a PLC to a field device
Single wire diameter #24 US wire gauge
Rated current 1.2 amps
Length 10 feet (3 meters)
PLC side connector 24-pin connector
Connector type Right-angle 24-pin D-type connector
The IC693CBL327 is an input and output cable designed for high-density I/O modules on Series 90-30 programmable logic controller (PLC) platforms. This cable works with the IC693CBL328 and is compatible with the IC693MDL654, IC693MDL655, IC693MDL752 and IC693MDL753 modules. The IC693CBL327 is a 24-pin I/O cable and is therefore not sufficient to provide termination connections for 32-point modules. Thus, IC693CBL328 will be paired with IC693CBL327. The IC693CBL327 is installed on the left connector, while the IC693CBL328 is installed on the right or simply next to the IC693CBL327. The two I/O cables have the same connector depth, 2.0 inches from the front panel of the host I/O module. The IC693CBL327 PLC side connector is a right Angle Fujitsu FCN-365S024-AU connector with an overall length of 10 feet or 3 meters. The other end of this cable is a fly or strip wire that can be connected to a user-supplied I/O terminal, whether it is a PCB base or a standard terminal block assembly. It can also be used with 16-point I/O modules with TBQC I/O panel adapters installed. The IC693CBL327 has a wire size of #24 AWG per wire and a single current rating of 1.2 amps. The signal line is in the form of twisted pair and color-coded installation, which is easy to identify the wire. Wire is connected from end to end and pin 1 is connected to wire 1. The cable replaces the IC693CBL315 I/O cable, which provides more work space through the direction of the cable PLC side connector.
GE Fanuc IC693CBL327 cable is an accessory of GE Fanuc series 90-30 PLC modules. The GE Fanuc IC693CBL327 cable is designed to connect PLC modules to different field devices. The cable has a female pair connector at one end, and the wire at the other end is stripped and tinned. GE Fanuc IC693CBL327 cables are pre-wired and can be supplied as part of a pair of cables, such as the IC693CBL328 cable. This cable is unshielded. It is 10 feet or 3 meters long and has a 24-pin D connector at one end. This connector is a right Angle 24-pin D connector. The GE Fanuc IC693CBL327 is compatible with the GE Fanuc IC694MDL752 and IC694MDL753 modules. The GE Fanuc IC693CBL327 cable has a connector depth rating of 2 inches or 51 mm. This means that the cable will extend a length of 30 inches or 30 mm from the surface of the GE Fanuc Series 51-90 PLC module to which it is attached. If the PLC module connected to the GE Fanuc IC693CBL327 cable is installed in the cabinet, ensure that the cabinet depth is sufficient to accommodate both the depth level of the PLC module and the connector depth level of the cable, otherwise the cabinet may not provide adequate protection for the PLC, and both the PLC and the cable may be damaged. The cable may break.
