Technical specifications of IC693CBL325
Brand GE Fanuc
Series Series 90-30
Part number IC693CBL325
Describes the terminal board interface cable
Cable length 10.0 feet
Connector Type 36-pin connector
Cable type Interface cable
Apply DSM module to turn servo shaft terminal board
Wire shield. Yes.
Average weight 2.0 kg
Cable housing. Yes.
Conductive material 28 AWG size wire
The GE Fanuc IC693CBL325 Terminal board Connector cable is an I/O cable for GE series 90-30 PLC cable systems. The cable is provided in a package that includes a 3-meter cable, two 36-pin connectors, and an installation sheet. IC693CBL325 Terminal Board Connector cable connects the DSM314 module to the servo shaft terminal board or auxiliary terminal board. The IC693CBL325 terminal board connector cable can be replaced with a 1-meter long GE Series 90-30 terminal board interface cable called the IC693CBL324 cable. But unlike the 1-meter long IC693CBL324 terminal board interface cable, the IC693CBL325 terminal board Connector cable provides up to 3 meters (10 feet) of cable, Longer connection distances can be provided between the DSM module (IC693DSM302 or IC693DSM314 module) and the auxiliary terminal block or the servo shaft terminal board.
In digital mode, the GE IC693ACC335 digital servo shaft terminal board can be used to connect the DSM module to the GE Fanuc digital servo amplifier via 3 m IC693CBL325 wire or 1 m terminal board interface wire. The IC693ACC335 digital SERVO shaft terminal board has two 36-pin connectors, labeled "DSM" and "Servo" connectors. During installation, if operators use the IC693ACC335 digital servo shaft terminal board to access I/O inputs, such as over-the-range or in-situ restricted inputs, they should connect the IC693CBL325 terminal board cable to the "DSM" connector on the board face. At the same time, connect the other end of the cable to the connector labeled "Servo axis 1" or "Servo axis 2" on the DSM module.
