Technical specifications of IC693CBL332
Brand GE Fanuc
Series Series 90-30
Part number IC693CBL332
Description Connector cable
Length 2 m
Right or left cable Right cable
The Conductor Current is 1.6 amps
Masked or unmasked Indicates that the mask is not masked
PLC connection terminal
Compatible PLC device GE Fanuc IC694 programmable controller
The GE Fanuc IC693CBL332 cable is a fast connection cable with a 90 degree connector. It was designed by GE Fanuc to replace older cables with straight connectors. It connects GE series 90-30 systems with different industrial field equipment. It is a right-sided cable with two 24-pin connectors with tighteners. It provides a reliable connection for industrial automation applications. The IC693CBL332 cable is not shielded. The conductor is developed with advanced materials and is rated at 1.6 amps. The IC693CBL332 cable has a bending limit that should not be exceeded when connected to the PLC system. The 90-30 series PLC system is a widely used PLC in the GE Fanuc series.
A computer with an RS-485 port on the front panel can be used to configure a PLC. PLCS can also be easily programmed with a computer. The front of the PLC is equipped with network ports, status indicators and other ports. The status indicator displays the battery status, power flow, and PLC operating status. PLCS use batteries that can be easily replaced. Connector cables are fully compliant with global industrial and environmental standards. The IC693CBL332 cable is used with GE Fanuc IC694 series PLC equipment. It is connected to the PLC terminal. This accessory module can be used with I/O adapters and terminals for different modules. The voltage of the PLC system should be zero and the connection to the main power supply should be disconnected during the setup process.
