Technical specifications of IC693CBL333
Brand GE Fanuc
Series Series 90-30
Part number IC693CBL333
Description Connecting cable
Length 0.5 m
Connector double 24 pins
Right Angle connector Yes
Flexible cable. Yes.
Materials Industry PTE materials
Backplane connection support
The IC693CBL333 cable is a 0.5 meter connection cable manufactured by GE Fanuc. It is used with other devices that make up the 90-30 series PLC system. It is an I/O cable for 32-point I/O modules with dual 24-pin connectors. The cable is connected to the terminal of the PLC device. The cable has a right Angle connector and can be connected to the PLC system. It is used as a replacement for the old straight connector cables that are now obsolete. The right Angle connector of the IC693CBL333 cable takes up more installation space than previous models. All other pins are the same size. The cables are soft, made of industrial TPE material and can withstand different environmental conditions.
The IC693CBL333 cable is connected to the input/output side of the PLC baseboard. The 90-30 series PLC system is equipped with 4 leds on the front of the programmable power module. When the green LED as the "PWR LED" lights up, the power flow works normally. A green "OK LED" indicates that the CPU has passed the diagnostic test. The green RUN LED indicates that the CPU is running properly and the fault logic is resolved. The red "Battery LED" should be turned off during normal operation. If it is turned on, the battery should be removed from the PLC. During the battery replacement process, the PLC should not be turned off to avoid losing the program. However, when the IC693CBL333 cable is disconnected from the main power supply, it should be installed into the PLC system. The PLC can be easily connected to a personal computer.
