Technical specifications of IC693CPU311
Manufacturer GE Fanuc
Series Series 90-30
Series Series 90-30
Manufacturer GE Fanuc; Emerson Automation (Current) Emerson Automation (current)
Part number IC693CPU311
Product Description Embedded CPU mainboard
Series Series 90-30
Product Type Mainboard of the built-in CPU
Nooooo. Number of I/O slots five (5)
Part number IC693CPU311
Number of slots 5
Nooooo. Number of power sockets 1 (1)
Product Description Baseboard with embedded CPU
The embedded processor has up to 170 embedded timer and counter instructions available, and also supports shift register instructions. The backboard is also equipped with a non-volatile EPROM or EEPROM slot for memory expansion. The embedded CPU does not have an integrated port, instead the communication interface is hosted by a power module that is a single SNP slave and SNP-X slave protocol-compatible port. The optional communication protocols supported by this module include Ethernet, FIP, Profibus, GBC, GCM, and GCM+ option modules.
GE Fanuc Series 90-30 IC693CPU311 baseboard is a special baseboard with 5 slots and a built-in CPU. IC693CPU311 5-slot baseboard built-in CPU with 6 KB of user program memory. This particular backboard is a useful part of many 90-30 series PLCS, but it is not compatible with every PLC component in GE's 90-30 series product line. For example, the IC693CPU311 baseboard cannot accommodate 90-30 series PCM and CCM devices. The baseplate also does not have a battery-operated clock, interrupt, or override function. However, some of the features of the IC693CPU311's 5-slot backboard with a built-in CPU have features such as shift registers, 170 timers or counters, and 1 built-in serial port. The GE Fanuc Series 90-30 IC693CPU311 5-slot baseboard supports RAM and optional EPROM and EEPROM as its memory options. The backboard and its CPU can communicate via multipoint LAN, Profibus, FIP, Ethernet, GBC, GCM, and GCM+ optional communication modules. For every 1K of logic with Boolean contacts, its typical scan rate is 18 milliseconds and its CPU processor speed is 10 megahertz. The IC693CPU311 5-slot baseboard requires a 410 mah current load from a 5 V DC rated power supply to operate. It can operate in a temperature range of 32 to 140 degrees Fahrenheit or 0 to 60 degrees Celsius. The built-in serial port on this backboard can support both the SNP slave protocol and the SNP-X slave protocol. This port uses the connector on the PLC power module.
