Technical specifications of IC693CPU364
Brand GE Fanuc
Series Series 90-30
Part number IC693CPU364
Serial port RS-485 (via power supply)
User memory 240K bytes
Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
CPU Type Single-socket CPU module with embedded Ethernet interface
Processor speed 25 megahertz
Register memory 240 KB
Power requirements 1.51 amps (from +5 VDC power supply)
Typical scan rate 0.22 ms per 1K logic (Boolean contacts)
Memory Storage types RAM and flash
Ethernet Ports 1 (1)
Storage temperature -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
The IC693CPU364 is a controller module in the 90-30 series product family. Manufactured by GE Fanuc Automation, the controller features one (1) Ethernet interface, 240KB of user memory, an 80386EX processor with a processor speed of 25 MHz, and a typical sweep rate of 0.22 ms per 1K logic for Boolean contacts.
The controller supports up to 2,048 discrete inputs, 2,048 discrete outputs, up to 1,280 bits of internal discrete global memory, 4096 internal coils, 256-bit temporary output coils, and when using Logicmaster software, Configurable analog inputs in 128 words in 128 to 16,384 word increments, from 128 to 32,640 words using Control version 2.2, and analog outputs using Logicmaster programming software and 128 configured in 128 word increments, From 128 to 16,384 words set to 32,640 words (using Control version 2.2).
IC693CPU364 is commonly referred to as CPU364. It is a single slot width controller module with a processor type of 80386EX, a processor speed of 25 MHz, and a Boolean contact logical scan rate of 0.22 ms per 1K (typical value). It has a total of 240KB of embedded user memory, which can be configured according to the configured %R, %AI, and %AQ variables and registers. It has one (1) Ethernet communication port for programming and communication. The controller can also communicate via the built-in RS485 communication port of the power supply installed in the leftmost slot of the baseboard. This controller supports up to eight (8) backboards, of which one (1) is a CPU backboard and seven (7) is a remote I/O backboard.
In addition to having Ethernet communication, the IC693CPU364 module also comes with a serial port located on the PLC power supply. The IC693CPU364 module requires a PLC power load of 1.51 amps (5 volts DC). The processor speed on the module is 25 megahertz. The recommended ambient temperature range is 0 to 60 degrees Celsius. The total user memory is 240 KB. The IC693CPU364 module can be installed in slot 1 of the modular CPU mainboard. Slot 1 is a unique size and type that is only available for CPU modules. Modular CPU backboards support expansion and remote backboards. The 25-pin D-type expansion connector (female) located on the right side of the CPU backboard can be used to connect to a remote or expansion backboard.
