Technical specifications of IC693CPU366
Brand GE Fanuc
Series Series 90-30
Part number IC693CPU366
Product Type CPU module
Microprocessor 80386EX
Profibus main station Yes
Serial port 1
Voltage input 5 volts DC
Current consumption 940 MA
Operating temperature 0 to 60 degrees Celsius
Storage temperature -40 to 85 degrees Celsius
The GE Fanuc IC693CPU366 module is a CPU module with Profibus master equipment for GE series 90-30 PLC systems. The embedded Profibus master device enables the CPU to send and receive data from the Profibus network. Connect to the Profibus network via a 9-pin female RS-485 port. Data rates supported by the Profibus network include 9.6 kbps, 19.2 kbps, 500 kbps, 1.5 Mbps, 3 Mbps, 6 Mbps, and 12 Mbps. The module has a battery life of 25 months at 10 degrees Celsius and 60 months at 5.5 degrees Celsius. The IC693CPU366 module can be programmed using PLC version 5.0 SP1 or later Machine Edition Logic Developer software. For PLC C programming, you can use the PLC C Kit (version 4 or later). The serial RS-232 port is accessible via a 9-pin male connector and can be used for firmware upgrades.
The IC693CPU366 module has a rated current of 940 mA at 5 volts DC. For optimal performance, the air temperature around the IC693CPU366 module should be maintained between 0 and 60 degrees Celsius. The recommended storage temperature range is -40 to 85 degrees Celsius. The IC693CPU366 module supports a total of 4096 discrete I/O points. The total register memory available on this module is 240 KB. Floating point math support is available through firmware. The microprocessor on which the IC693CPU366 module is based is the 80386EX microprocessor. A modular CPU, such as the IC693CPU366 module, consists of a CPU, memory, and associated integrated circuit chips soldered to a circuit board mounted in a plug-in module. The IC693CPU366 CPU module is installed in slot 1 of the PLC mainboard.
